LVL1 - User contributions [en]

LazerTazerTag

2012-07-23T18:35:08Z

Jdc928: /* Need To Purchase or Acquire */

== Still To Figure Out ==
* Sending Medic IR from arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Reading IR pin on Arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Setup Game Sketch in Arduino
* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
*<strike> Possibly Two more Rifles</strike>
*<strike> 16 Tens Unit Lead Wire Sets</strike>
* LOTS OF BATTERIES
* Two more packs of elastic for arm/leg bands
* Facemask
* Knee Pads
* Elbow Pads

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
* Gun On
** Finger Print on Rifles
* Set Team
* Check for Three Solid Life bars
* Start Game
* IR In is on interrupt

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

== Build Instructions for Full Set ==

=== Gun Wiring ===
Gun wiring taps inside gun and comes out through headphone port. Terminate each end with a JST plug and label as 1,2,3.

* IR Receiver
* 5V
* Gnd
* On/Off Toggle
* LifeLED1
* LifeLED2
* LifeLED3
* TeamSelect
* IR Out

=== IR Domes ===
IR Domes get wired to a JST plug

* IR Recieve
* Pwr
* Gnd

=== Tense Leads ===
Tens leads are left as Raw leads and ran through the shoulder and belt loops to the inside of the vest pocket.

* GND lead of each tense set goes to common groun
* V+ of each lead gets ran through 5V relay channel

LazerTazerTag

2012-07-23T16:27:58Z

Jdc928:

== Still To Figure Out ==
* Sending Medic IR from arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Reading IR pin on Arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Setup Game Sketch in Arduino
* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
* Possibly Two more Rifles
* LOTS OF BATTERIES
* Two more packs of elastic for arm/leg bands
* Facemask
* Knee Pads
* Elbow Pads

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
* Gun On
** Finger Print on Rifles
* Set Team
* Check for Three Solid Life bars
* Start Game
* IR In is on interrupt

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

== Build Instructions for Full Set ==

=== Gun Wiring ===
Gun wiring taps inside gun and comes out through headphone port. Terminate each end with a JST plug and label as 1,2,3.

* IR Receiver
* 5V
* Gnd
* On/Off Toggle
* LifeLED1
* LifeLED2
* LifeLED3
* TeamSelect
* IR Out

=== IR Domes ===
IR Domes get wired to a JST plug

* IR Recieve
* Pwr
* Gnd

=== Tense Leads ===
Tens leads are left as Raw leads and ran through the shoulder and belt loops to the inside of the vest pocket.

* GND lead of each tense set goes to common groun
* V+ of each lead gets ran through 5V relay channel

LazerTazerTag

2012-07-23T16:27:39Z

Jdc928: /* Arduino GamePlay */

== Still To Figure Out ==
* Sending Medic IR from arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Reading IR pin on Arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Setup Game Sketch in Arduino
* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
* Possibly Two more Rifles
* LOTS OF BATTERIES
* Two more packs of elastic for arm/leg bands
* Facemask
* Knee Pads
* Elbow Pads

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
* Gun On
** Finger Print on Rifles
* Set Team
* Check for Three Solid Life bars
* Start Game
* IR In is on interrupt

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

== Build Instructions for Full Set ==

=== Gun Wiring ===
Gun wiring taps inside gun and comes out through headphone port. Terminate each end with a JST plug and label as 1,2,3.

* IR Receiver
* 5V
* Gnd
* On/Off Toggle
* LifeLED1
* LifeLED2
* LifeLED3
* TeamSelect
* IR Out

=== IR Domes ===
IR Domes get wired to a JST plug

* IR Recieve
* Pwr
* Gnd

=== Tense Leads ===
Tens leads are left as Raw leads and ran through the shoulder and belt loops to the inside of the vest pocket.

* GND lead of each tense set goes to common groun
* V+ of each lead gets ran through 5V relay channel

LazerTazerTag

2012-07-23T16:27:15Z

Jdc928:

== Still To Figure Out ==
* Sending Medic IR from arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Reading IR pin on Arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Setup Game Sketch in Arduino
* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
* Possibly Two more Rifles
* LOTS OF BATTERIES
* Two more packs of elastic for arm/leg bands
* Facemask
* Knee Pads
* Elbow Pads

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
* Gun On
** Finger Print on Rifles
* Set Team
* Check for Three Solid Life bars
* Start Game
* IR In is on interrupt
*

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

== Build Instructions for Full Set ==

=== Gun Wiring ===
Gun wiring taps inside gun and comes out through headphone port. Terminate each end with a JST plug and label as 1,2,3.

* IR Receiver
* 5V
* Gnd
* On/Off Toggle
* LifeLED1
* LifeLED2
* LifeLED3
* TeamSelect
* IR Out

=== IR Domes ===
IR Domes get wired to a JST plug

* IR Recieve
* Pwr
* Gnd

=== Tense Leads ===
Tens leads are left as Raw leads and ran through the shoulder and belt loops to the inside of the vest pocket.

* GND lead of each tense set goes to common groun
* V+ of each lead gets ran through 5V relay channel

LazerTazerTag

2012-07-23T16:21:23Z

Jdc928:

LazerTazerTag

2012-07-23T16:21:12Z

Jdc928:

LazerTazerTag

2012-07-23T16:14:22Z

Jdc928: /* Still To Figure Out */

== Still To Figure Out ==
* Sending Medic IR from arduino
* Reading IR pin on Arduino
** SpreadSheet of all IR Codes [https://docs.google.com/spreadsheet/ccc?key=0Arz5A-6gtL3kdDRFNlVpSHdkUEhUTi1mMHhlaDU0WUE#gid=2]
* Setup Game Sketch in Arduino

* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
* Possibly Two more Rifles
* LOTS OF BATTERIES

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
*Gun On
**Finger Print on Rifles
*Set Team
*Check for Three Solid Life bars
*Start Game

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

LazerTazerTag

2012-07-23T16:13:55Z

Jdc928:

== Still To Figure Out ==
* Sending Medic IR from arduino
* Reading IR pin on Arduino
** SpreadSheet of all IR Codes (32bit IR Data Packets)
* Setup Game Sketch in Arduino

* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
* Possibly Two more Rifles
* LOTS OF BATTERIES

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
*Gun On
**Finger Print on Rifles
*Set Team
*Check for Three Solid Life bars
*Start Game

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

LazerTazerTag

2012-07-23T16:11:42Z

Jdc928: /* Still To Figure Out */

== Still To Figure Out ==
* Sending Medic IR from arduino
* Setup Game Sketch in Arduino
* Reading IR pin on Arduino
* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
* Possibly Two more Rifles
* LOTS OF BATTERIES

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
*Gun On
**Finger Print on Rifles
*Set Team
*Check for Three Solid Life bars
*Start Game

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

LazerTazerTag

2012-07-23T16:11:22Z

Jdc928:

== Still To Figure Out ==
* Capturing and repeating Medic IR from arduino
* Setup Game Sketch in Arduino
* Reading IR pin on Arduino
* Would be nice to figure out how to use a small chip to just out a specific IR code over and over

== Task To Do ==
* Build Cardboard Forts and Barriers
* Make additional 360 IR Domes
* Make 2 more full arm/leg band sets
* Move guns On/Off switch to arduino pin
* Move guns "Team Select button to Arduino Pin
* Add 2 Arduino ON/Off Push Buttons for gameplay options

== Need To Purchase or Acquire ==
* More IR Receivers
* Possibly More Tense Units
* IR Domes and PCB's
* Possibly Two more Rifles
* LOTS OF BATTERIES

== Arduino GamePlay ==
The arduino will control the on/off of the gun.
Game Play order:
*Gun On
**Finger Print on Rifles
*Set Team
*Check for Three Solid Life bars
*Start Game

== If we have time ==
* IR Blaster on Parrot AR Drone
* IR Med Packs
* IR Granades

LazerTazerTag

2012-07-23T16:10:56Z

Jdc928: Created page with "== Still To Figure Out == * Capturing and repeating Medic IR from arduino * Setup Game Sketch in Arduino * Reading IR pin on Arduino * Would be nice to figure out how to use a sm..."

MOTHER Environment Stream

2012-02-29T22:06:55Z

Jdc928: Created page with "==Mother Navigation== MotherStatus | Mother To-Do List | Mother Wish List | MotherMain"

==Mother Navigation==
[[MotherStatus]] | [[Mother To-Do List]] | [[Mother Wish List]] | [[MotherMain]]

MotherStatus

2012-02-29T22:06:12Z

Jdc928: /* OTHER */

==Mother Navigation==
[[MotherStatus]] | [[Mother To-Do List]] | [[Mother Wish List]] | [[MotherMain]]

==Integrated Systems==
===Monitored and Controllable Systems===
*[[DSC Security System]]
*SqueezeCenter Distributed Media Server
*[[Mother Google Talk System]]
*Mother Email System
*Mother SIP Phone system
*Mother Speech System
*[[Mother Arduino]]
*[[Occupancy Monitoring & Graphing]]
*[[Lighting System]]
[[Mother - Monitored and Controllable Systems to implement]]

===Monitor Only Systems===
*Weather Station Database
*LVL1 LAN Network
*LVL1 Group Calendars
[[Mother - Monitor Only Systems to Implement]]

===Control Only Systems===
*LED Signs System
[[Mother - Control Only Systems to Implement]]

==Front Ends==
===Web Interface===
*Mother Main Web Interface
*Mother Guest Web View
*Mother Pachube Charts

===Touch Interfaces===
*HSTouch

===Mobile Interfaces===
*Android/iPhone HSTouch
*Mobile Friendly Web Interface

===OTHER===
[[MOTHER Environment Stream]]

==Device Types Being Monitored==
*All LVL1 networked equipment
*Various Members Networked Devices
*Various PIR Motions throughout LVL1 Space
*Various Door sensors throughout LVL1 Space
*Weather information for Louisville KY
*Weather information for Spaceport IN
*Current media related information per each media zone
*Multiple SIP Extensions
*Mother Email related information
*Online Gtalk users
*RSS Data Feeds
*LVL1 Group Calendar Events
[[Mother - Device Types to Implement]]

==Current "Stable" Space Scenes==
===Audio Scenes===
====Womp Womp Womp====
*Set Main room audio levels
*Set Main room audio zone to Dubstep

==Current "Stable" Events==
===Notifications===
====Green Notifications====
*Notification of Unknown Device on LVL1 network
*Notification of space occupancy change
[[Mother - Notifications to implement]]

===Occupancy===
*Logging of all occupancy devices to online database and graphing
[[Mother - Occupancy Events to Implement]]

===Hacktivity===
*Maintenance and Resetting of all Jon and Clark gushes and counters
[[Mother - Hacktivity Events to Implement]]

MotherStatus

2012-02-29T22:05:36Z

Jdc928: /* Front Ends */

==Mother Navigation==
[[MotherStatus]] | [[Mother To-Do List]] | [[Mother Wish List]] | [[MotherMain]]

==Integrated Systems==
===Monitored and Controllable Systems===
*[[DSC Security System]]
*SqueezeCenter Distributed Media Server
*[[Mother Google Talk System]]
*Mother Email System
*Mother SIP Phone system
*Mother Speech System
*[[Mother Arduino]]
*[[Occupancy Monitoring & Graphing]]
*[[Lighting System]]
[[Mother - Monitored and Controllable Systems to implement]]

===Monitor Only Systems===
*Weather Station Database
*LVL1 LAN Network
*LVL1 Group Calendars
[[Mother - Monitor Only Systems to Implement]]

===Control Only Systems===
*LED Signs System
[[Mother - Control Only Systems to Implement]]

==Front Ends==
===Web Interface===
*Mother Main Web Interface
*Mother Guest Web View
*Mother Pachube Charts

===Touch Interfaces===
*HSTouch

===Mobile Interfaces===
*Android/iPhone HSTouch
*Mobile Friendly Web Interface

===OTHER===
MOTHER Environment Stream

==Device Types Being Monitored==
*All LVL1 networked equipment
*Various Members Networked Devices
*Various PIR Motions throughout LVL1 Space
*Various Door sensors throughout LVL1 Space
*Weather information for Louisville KY
*Weather information for Spaceport IN
*Current media related information per each media zone
*Multiple SIP Extensions
*Mother Email related information
*Online Gtalk users
*RSS Data Feeds
*LVL1 Group Calendar Events
[[Mother - Device Types to Implement]]

==Current "Stable" Space Scenes==
===Audio Scenes===
====Womp Womp Womp====
*Set Main room audio levels
*Set Main room audio zone to Dubstep

==Current "Stable" Events==
===Notifications===
====Green Notifications====
*Notification of Unknown Device on LVL1 network
*Notification of space occupancy change
[[Mother - Notifications to implement]]

===Occupancy===
*Logging of all occupancy devices to online database and graphing
[[Mother - Occupancy Events to Implement]]

===Hacktivity===
*Maintenance and Resetting of all Jon and Clark gushes and counters
[[Mother - Hacktivity Events to Implement]]

01/31/2012

2012-02-01T00:36:49Z

Jdc928:

STREAMING (maybe):

* Streaming projector screen from meeting: [https://join.me/900-528-826]
* Streaming video/audio of meeting: [http://www.ustream.tv/channel/highball-1]
* Last Week Hactivity Stats: 
**Last Week Hacktiviy Total: 327 (up) |
== Agenda ==
#You can find all of our Meeting Minutes at http://wiki.lvl1.org
#Please Sign in on the meeting attendance roster.
#Waivers of Liability - Please sign if you have not already
#Old Business
##Equipment Wanted
###Crucible and investment (> 3000 deg)
###Tig Welder
##Open Invitations for LVL1 Contributions (for serious considerations, please put it in writing)
###Bernheim CONNECT 2012 Projects / Planning
####More fire
###Louisville Science Center Engineers Week (2/23 - 2/25)
###U of L Speed School Engineer Expo (3/3)
###Projects / Installations for Louisville Metro
#New Business
##Space Upgrades
###More LVL1 Stickers
#Upcoming Workshops, Meetings and Events
##Mother Meeting Every Monday 7PM
##LVL1 Open Meeting & Making every Tuesday 8pm
##White Star Balloon Meeting (Thurs 8pm)
##Pow-Pow-Powerwheels Racing Series meeting (Thurs 9pm)
###First Race: June 23-24 Kansas City Makerfaire
##Makerships Deadline 1/31
###3 months membership and $100
###Apply with a project proposal
##Machine Shop Tour Field Trip (2/4)
##U of L Co-Op Makership Deadline 2/15
###http://www.lvl1.org/coopmakership/
##Louisville Science Center Engineers Week (2/23 - 2/25)
#Project Roll Call

O&D Current Actions

2012-01-26T17:17:25Z

Jdc928: /* 501(c)3 Status */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==Things to Do (Current)==
===501(c)3 Status===
Current Status: Waiting for Response 
Details and Log of application status here: [[501c3]]

(Chris, I moved these notes to the actual [[501c3]] page

===Director Goals===
During our first meeting of 2012, we all discussed the idea of each of the directors spending the next few weeks thinking about some specific aspects of LVL1 that they would like focus on improving and set some actions in place to help do so. These aspects should be related to those that directly relate to our Mission Statement, like Membership growth, Space Safety, Space HAPPINESS?, community involvement, etc.. The directors are not necessarily responsible for completing these goals but should take some initiative to make sure there is always some progress happening on these projects. (The idea is to NEVER exclude members from these projects or any other, but rather highly encourage any and all members to be involoved)

===Get Business Cards for LVL1===
We need to get prices and explore the options of getting directors personalized business cards as well as general business cards that can be used by all members of the space to help promote LVL1. The president of LVL1 needs to have personalized business cards at all times.
*Get price quotes for Generic Non-personalized cards
*Get prices for personalized cards

===<del>Create LVL1 Wiki Directors Pages</del>===
*(Jon Strike-through on 1/18)
We need to make some pages that will help the directors document and track the issues and task we are working on. These pages will also serve as a means to make these discussions and actions available to the all the members of LVL1 as well

==Things to Do (Future/Plan)==
===New Member Automation===
Automation of all actions required to take place upon the registration of a new member. 
Full details here:[[ MemberRegistration]]

===Visitor Registration Automation===
System for collecting visitor information. Possible solutions include touch screen form at front door. 
Full details here: [[VisitorRegistration]]

===Visitor Follow-Up===
Process by which we can follow up with visitors in an effort to find out what they thought about the space. We want this to be as non-invasive as possible. 
Full details here: [[VisitorFollowUp]]

===Upgrading LVL1 "Store"/"Vending" setup and items===
Re-vamping the LVL1 "Store" items. Removing of low-cost "consumables" and including more "Kit" based items. 
Full Details here: [[LVL1Store]]

I'm in the process of talking to Jeff about this. In the next couple of weeks, I'll probably take over control of the store.
--[[User:Bluyster|Bluyster]] 13:24, 19 January 2012 (EST)

===Completely non-committal exploratory real estate fact-finding mission===
[[FutureRealEstateResearch]]

===Documenting the Space===
System for labeling areas and objects in the space. Expanding and reconciling the current QR code inventory system. 
Full details here:[[AboutLVL1]]

==Directors Goals==
Directors: If you decide there is an area you would like to focus on then add it here.
===Chris C===
* Finalize 501c(3)
* <del>Get heat in the upstairs loft to make it usable</del>
* Increase our membership number to > 50 before 2013
* Push a culture of respectfulness (cleanliness, helpfulness, less hurt feelings)

===Jonathan Clark===
I would like to dedicate a majority of my time as a Director on improving the functionality and atmosphere of the space. I believe in having a very open, do-what-you-want, type of environment at Lvl1, but think there is a lot we can do to make everyone's time at the space more efficient and enjoyable. No one wants to spend half of their "LVL1 time" looking for items, cleaning others messes, or feeling in any other way, less then enthusiastic about visiting the space.

I also think the quality of our space, and functions of our space have a great impact on visitors and potential members. Visitors should see a community that works together to function in a way that makes them want to be a part of our super awesomeness. I think we could use some improvement in these areas as we continue to grow. With that being said, I would describe my "Directors" goal to be the following:

====Area of Focus: "Quality of Life" @ the Space====
Goals (Ordered in Priority):
* Finish implementing and setting up the Donations,Equipment, and Loans Guidelines.
* Work on implementing volunteer basis chore assistance.
* Create and Encourage "Permanent Project" displays
* Refine and Revive Area Host System

=== Tim M ===
I like to believe the LVL1 is an open environment that encourages people to do awesome things. Currently as a group we are spending too much of the time wondering where do I find this tool or this widget. Wondering who is this person can make people feel uncomfortable and unsafe, while not completely unavoidable we can take steps to keep people informed of new members. The fact that you can get help with almost anything should be flaunted as a resource, more than any tool.

====Area of Focus: "What is it and what is going on" ====
* Better display of resources available to LVL1 Members and to guests
* documentation and labeling of equipment and resources
* make new member introductions and documentation more automated.
* Listing things everyone is good at and are willing to help with.

501c3

2012-01-26T17:16:39Z

Jdc928: /* Actions Log */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==501(c)3==
This page should contain any information related to the status, contacts, resources, etc, of our 501(c)3 status.

*Note From JonC: I haven't added anything here, but just wanted to create a page that the directors could use to keep a record of actions, items to be done, current status, etc. Feel free to add anything you feel is important to this page.

==Contacts==

==Resources==

==Documentation==

==Actions Log==

*Update (1/20/12): I spoke with a tax advocate representative with the IRS. I explained the situation that we have not heard from our agent in months, despite repeated voicemails. She put a request in 'the system' to have our agent return my call to my personal cell phone. They are required to respond within 10 business days. -C

*Update (1/18/12): I spoke with a non-profit CPA to get some advice. Although our current IRS agent is non-responsive, we are advised not to provoke a responsible but continue to be polite. There are no IRS deadlines for processing these applications. I will continue to leave nice messages and hope to reach our agent. In the interim, it was suggested that I contact our local IRS office to get information of what our current 'status' is. I will follow-up on this and proceed accordingly. Josh has provided some contacts for legal representation, if it becomes necessary. -C

*1/18_JonC: Created Page

501c3

2012-01-26T17:16:26Z

Jdc928: /* Actions Log */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==501(c)3==
This page should contain any information related to the status, contacts, resources, etc, of our 501(c)3 status.

*Note From JonC: I haven't added anything here, but just wanted to create a page that the directors could use to keep a record of actions, items to be done, current status, etc. Feel free to add anything you feel is important to this page.

==Contacts==

==Resources==

==Documentation==

==Actions Log==
Date_Name: Action

*Update (1/20/12): I spoke with a tax advocate representative with the IRS. I explained the situation that we have not heard from our agent in months, despite repeated voicemails. She put a request in 'the system' to have our agent return my call to my personal cell phone. They are required to respond within 10 business days. -C

*Update (1/18/12): I spoke with a non-profit CPA to get some advice. Although our current IRS agent is non-responsive, we are advised not to provoke a responsible but continue to be polite. There are no IRS deadlines for processing these applications. I will continue to leave nice messages and hope to reach our agent. In the interim, it was suggested that I contact our local IRS office to get information of what our current 'status' is. I will follow-up on this and proceed accordingly. Josh has provided some contacts for legal representation, if it becomes necessary. -C

*1/18_JonC: Created Page

501c3

2012-01-26T17:16:17Z

Jdc928: /* Actions Log */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==501(c)3==
This page should contain any information related to the status, contacts, resources, etc, of our 501(c)3 status.

*Note From JonC: I haven't added anything here, but just wanted to create a page that the directors could use to keep a record of actions, items to be done, current status, etc. Feel free to add anything you feel is important to this page.

==Contacts==

==Resources==

==Documentation==

==Actions Log==
Date_Name: Action

*Update (1/20/12): I spoke with a tax advocate representative with the IRS. I explained the situation that we have not heard from our agent in months, despite repeated voicemails. She put a request in 'the system' to have our agent return my call to my personal cell phone. They are required to respond within 10 business days. -C

*Update (1/18/12): I spoke with a non-profit CPA to get some advice. Although our current IRS agent is non-responsive, we are advised not to provoke a responsible but continue to be polite. There are no IRS deadlines for processing these applications. I will continue to leave nice messages and hope to reach our agent. In the interim, it was suggested that I contact our local IRS office to get information of what our current 'status' is. I will follow-up on this and proceed accordingly. Josh has provided some contacts for legal representation, if it becomes necessary. -C

*1/18_JonC: Created Page

501c3

2012-01-26T17:15:56Z

Jdc928: /* Actions Log */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==501(c)3==
This page should contain any information related to the status, contacts, resources, etc, of our 501(c)3 status.

*Note From JonC: I haven't added anything here, but just wanted to create a page that the directors could use to keep a record of actions, items to be done, current status, etc. Feel free to add anything you feel is important to this page.

==Contacts==

==Resources==

==Documentation==

==Actions Log==
*Date_Name: Action

Update (1/20/12): I spoke with a tax advocate representative with the IRS. I explained the situation that we have not heard from our agent in months, despite repeated voicemails. She put a request in 'the system' to have our agent return my call to my personal cell phone. They are required to respond within 10 business days. -C

Update (1/18/12): I spoke with a non-profit CPA to get some advice. Although our current IRS agent is non-responsive, we are advised not to provoke a responsible but continue to be polite. There are no IRS deadlines for processing these applications. I will continue to leave nice messages and hope to reach our agent. In the interim, it was suggested that I contact our local IRS office to get information of what our current 'status' is. I will follow-up on this and proceed accordingly. Josh has provided some contacts for legal representation, if it becomes necessary. -C

1/18_JonC: Created Page

MotherStatus

2012-01-22T18:29:09Z

Jdc928: /* Monitored and Controllable Systems */

==Mother Navigation==
[[MotherStatus]] | [[Mother To-Do List]] | [[Mother Wish List]] | [[MotherMain]]

==Integrated Systems==
===Monitored and Controllable Systems===
*[[DSC Security System]]
*SqueezeCenter Distributed Media Server
*[[Mother Google Talk System]]
*Mother Email System
*Mother SIP Phone system
*Mother Speech System
*[[Mother Arduino]]
*[[Occupancy Monitoring & Graphing]]
*[[Lighting System]]
[[Mother - Monitored and Controllable Systems to implement]]

===Monitor Only Systems===
*Weather Station Database
*LVL1 LAN Network
*LVL1 Group Calendars
[[Mother - Monitor Only Systems to Implement]]

===Control Only Systems===
*LED Signs System
[[Mother - Control Only Systems to Implement]]

==Front Ends==
===Web Interface===
*Mother Main Web Interface
*Mother Guest Web View
*Mother Pachube Charts

===Touch Interfaces===
*HSTouch

===Mobile Interfaces===
*Android/iPhone HSTouch
*Mobile Friendly Web Interface

==Device Types Being Monitored==
*All LVL1 networked equipment
*Various Members Networked Devices
*Various PIR Motions throughout LVL1 Space
*Various Door sensors throughout LVL1 Space
*Weather information for Louisville KY
*Weather information for Spaceport IN
*Current media related information per each media zone
*Multiple SIP Extensions
*Mother Email related information
*Online Gtalk users
*RSS Data Feeds
*LVL1 Group Calendar Events
[[Mother - Device Types to Implement]]

==Current "Stable" Space Scenes==
===Audio Scenes===
====Womp Womp Womp====
*Set Main room audio levels
*Set Main room audio zone to Dubstep

==Current "Stable" Events==
===Notifications===
====Green Notifications====
*Notification of Unknown Device on LVL1 network
*Notification of space occupancy change
[[Mother - Notifications to implement]]

===Occupancy===
*Logging of all occupancy devices to online database and graphing
[[Mother - Occupancy Events to Implement]]

===Hacktivity===
*Maintenance and Resetting of all Jon and Clark gushes and counters
[[Mother - Hacktivity Events to Implement]]

Craftsmen Work Light

2012-01-20T20:45:01Z

Jdc928: Created page with " {{Template:Equipment |owner=Joshua Wilcox |serial=0040 |model=16.8 Volt Work Light model# 982138-001 |arrived=1/21/12 |doesitwork=Yes |contact=Joshua Wilcox |where=Wood Shop }}"

{{Template:Equipment
|owner=Joshua Wilcox
|serial=0040
|model=16.8 Volt Work Light model# 982138-001
|arrived=1/21/12
|doesitwork=Yes
|contact=Joshua Wilcox
|where=Wood Shop
}}

Equipment

2012-01-20T20:43:26Z

Jdc928: /* Tools */

This page is meant to be a master list for all of the equipment at LVL1. Add a wiki page link here and follow it to fill out the details. QR Code images and general information are generated with a simple MediaWiki template. Cut, paste and edit the following code into a new wiki page

<code><nowiki>
{{Template:Equipment
|owner=Owner of Loaner of equipment
|serial=Serial Number
|model=Make/Model of equipment
|arrived=When this thing first showed up
|doesitwork=Does this work or not
|contact=person to contact
|where=where is it
}}
</nowiki></code>

=== LVL1 Equipment Catalog ===

== Safety ==
* [[Fire Extinguisher]]
* [[First Aid Kit]]

== Communications ==
* [[HF Transceiver]]
* [[Satelite Modem]]
* [[Icom IC-229H 2M Transceiver]]
* [[Astron RS-20A]]

== Electronics Equipment ==
* [[Tektronix 2432 Digital Oscilloscope]]
* [[BK Dual Time Base Oscillosope]]
* [[Fluke Digital Multimeter 8000A]]
* [[Leader DC Tracking Power Supply]]
* [[Heathkit Sine-Square Audio Generator]]
* [[Sencore Capacitor Inductor Analyzer]]
* [[Bel MERIT All-In-One Instrument]]
* [[HD Tesla High Voltage Coils]]
* [[Jacob's Ladder with Enclosure]]
* [[Heathkit Oscilloscope]]
* [[Fluke 37 Multimeter]]
* [[MPJA Soldering Station]]
* [[Hitachi Oscilloscope]]

== Printing ==
* [[HP 2600n Color LaserJet]]
* [[Purple Cows Laminator]]
* [[GBC Personal Laminator]]
* [[Brother Label Maker]]
* [[Veruca Gloop|Makerbot - Veruca Gloop]]

== Audio / Video ==
* [[Onkyo AV Receiver]]
* [[KLH Audio Speakers]]
* [[Peavey Audition 30 Amplifier]]
* [[Boss Digital Reverb Pedal]]
* [[Boss Digital Delay Pedal]]
* [[Boss Dr. Rhythm Machine]]
* [[Crown CE1000 Amp]]
* [[Carvin 1584 Speaker]]
* [[Zoom Handy Recorder H2]]
* [[Harmony Electric Guitar]]
* [[Playmate Electric Guitar]]
* [[Philips Magnavox Smart Series CRT TV]]
* [[Marshall MG Series 15CD Amplifier]]
* [[Gibson Epiphone Electric Guitar]]
* [[Western Safety Megaphone]]
* [[Kinect]]
* [[Video Visualizer]]
* [[InfocusProjector]]
* [[Oculus LVL1]]
* [[Oculus LVL1 Nikon]]

== Tools ==
* [[Craftsmen Work Light]]
* [[Craftsmen Cordless Drill]]
* [[Milwaukee Sawzall]]
* [[KeyLessEntry]]
* [[Full Spectrum Laser]]
* [[CNC Machine]]
* [[Drill Press]]
* [[Dremel 300]]
* [[Drill bit set]]
* [[Gray Tool Kit]]
* [[Tool Cart]]
* [[GE Hotplate]]
* [[Dremel Drill Press]]
* [[iFixit 54 Piece Bit Driver Kit]]
* [[iFixit 26 Piece Bit Driver Kit]]
* [[52 Piece Racheting Wrench Kit]]
* [[32 Piece Screwdriver Kit]]
* [[Rigid WetDry Vac]]
* [[Craftsman 10 inch Tablesaw]]
* [[Craftsman 13 inch Scrollsaw]]
* [[Belt Sander]]
* [[DeWalt Compound Miter Saw]]
* [[Buffalo Wood Lathe]]
* [[Multi-Mig Welder]]
* [[Toolkraft Drill Press]]
* [[Hitachi Cordless Driver Drill]]
* [[Sewing machine]]
* [[Vacuum pump]]
* [[Heavy Duty Bandsaw]]
* [[Hitachi Hammer Drill]]
* [[Ryobi Mini Power Saw]]
* [[Ryobi Power Drill]]
* [[Ryobi Sawzaw]]
* [[Ryobi Battery Charger]]
* [[Ryobi Battery (x1)]]
* [[Black & Decker 14.4V Cordless Saw]]
* [[Black & Decker 14.4 Cordless Drill #1]]
* [[Black & Decker 14.4 Cordless Drill #2]]
* [[Black & Decker 14.4 Batteries (x3)]]
* [[Black & Decker Battery Charger]]
* [[Dewalt Battery Charger]]
* [[Black & Decker Corded Drill]]
* [[Husky Pneumatic Socket Wrench ]]
* [[Husky Pneumatic Hammer ]]
* [[Husky Pneumatic Impact Wrench ]]
* [[Husky Pneumatic Rotary Tool]]
* [[Husky Pneumatic Paint Sprayer ]]
* [[Powermate Pneumatic Nail Gun]]
* [[Pneumatic Tire Pressure Gauge and Hose]]
* [[Rotozip Rotary Tool]]
* [[Dremel 200 Series]]
* [[Dremel MultiPro]]
* [[Dremel Flex Shaft Extender]]
* [[Dremel Multi Purpose/Bench Press Stand ]]
* [[ColdHeat Battery Powered Soldering Iron]]
* [[Sperry LAN TRACKER]]
* [[Kobalt 3.6V Lithium Drill]]
* [[Ryobi 4V Lithium Drill]]
* [[Unknown Lithium Drill]]
* [[4.8V Cordless Screwdriver]]
* [[Compression Tool Kit]]
* [[Conduit Pipe Cutters (x2)]]
* [[TaskForce Corded Skill Saw]]
* [[SKIL Dual Axis Rotary Laser Level]]
* [[Masonry/Boring/Forester Bit Kits]]
* [[RJ11/RJ45 Terminating Tool]]
* [[Ideal 10/100 Terminating Punch]]
* [[CenTech Fiberglass Wiring Rods]]
* [[JET Dust Collection System ]]
* [[120 Volt 100 Amp Welder ]]
* [[Corona Machine ]]

== Kitchen ==
* [[Melitta Coffee Maker]]
* [[Kitchen Fridge]]
* [[Kenmore Microwave]]
* [[Kegerator]]
* [[Enhanced Toaster Pastry]]

== Misc ==
* [[Mr. White PC]]
* [[Guard dog]]
* [[Toms Vending Machine]]
* [[iRobot Roomba Robotic Vacuum]]
* [[Radio Teletype Machine]]
* [[Hyundai Monitor]]
* [[Toy Helicopter]]
* [[Beehive Light Show]]
* [[Star Wars Force Trainer]]
* [[Robo-Pony]]
* [[Make T-Shirts]]

== Large multiple QR sheets for mass printing ==

[[Equipment/QRCodes|Master List of QR Codes]]

[[Big Soldering Station Sticker Sheet]]

Craftsmen Cordless Drill 16.8 Volt

2012-01-20T20:42:20Z

Jdc928: Created page with " {{Template:Equipment |owner=Joshua Wilcox |serial=G0040 |model=Craftsmen 16.8 Volt 982138-001 |arrived=1/20/12 |doesitwork=Yes |contact=Joshua Wilcox |where=Wood Shop }}"

{{Template:Equipment
|owner=Joshua Wilcox
|serial=G0040
|model=Craftsmen 16.8 Volt 982138-001
|arrived=1/20/12
|doesitwork=Yes
|contact=Joshua Wilcox
|where=Wood Shop
}}

Equipment

2012-01-20T20:40:46Z

Jdc928:

This page is meant to be a master list for all of the equipment at LVL1. Add a wiki page link here and follow it to fill out the details. QR Code images and general information are generated with a simple MediaWiki template. Cut, paste and edit the following code into a new wiki page

<code><nowiki>
{{Template:Equipment
|owner=Owner of Loaner of equipment
|serial=Serial Number
|model=Make/Model of equipment
|arrived=When this thing first showed up
|doesitwork=Does this work or not
|contact=person to contact
|where=where is it
}}
</nowiki></code>

=== LVL1 Equipment Catalog ===

== Safety ==
* [[Fire Extinguisher]]
* [[First Aid Kit]]

== Communications ==
* [[HF Transceiver]]
* [[Satelite Modem]]
* [[Icom IC-229H 2M Transceiver]]
* [[Astron RS-20A]]

== Electronics Equipment ==
* [[Tektronix 2432 Digital Oscilloscope]]
* [[BK Dual Time Base Oscillosope]]
* [[Fluke Digital Multimeter 8000A]]
* [[Leader DC Tracking Power Supply]]
* [[Heathkit Sine-Square Audio Generator]]
* [[Sencore Capacitor Inductor Analyzer]]
* [[Bel MERIT All-In-One Instrument]]
* [[HD Tesla High Voltage Coils]]
* [[Jacob's Ladder with Enclosure]]
* [[Heathkit Oscilloscope]]
* [[Fluke 37 Multimeter]]
* [[MPJA Soldering Station]]
* [[Hitachi Oscilloscope]]

== Printing ==
* [[HP 2600n Color LaserJet]]
* [[Purple Cows Laminator]]
* [[GBC Personal Laminator]]
* [[Brother Label Maker]]
* [[Veruca Gloop|Makerbot - Veruca Gloop]]

== Audio / Video ==
* [[Onkyo AV Receiver]]
* [[KLH Audio Speakers]]
* [[Peavey Audition 30 Amplifier]]
* [[Boss Digital Reverb Pedal]]
* [[Boss Digital Delay Pedal]]
* [[Boss Dr. Rhythm Machine]]
* [[Crown CE1000 Amp]]
* [[Carvin 1584 Speaker]]
* [[Zoom Handy Recorder H2]]
* [[Harmony Electric Guitar]]
* [[Playmate Electric Guitar]]
* [[Philips Magnavox Smart Series CRT TV]]
* [[Marshall MG Series 15CD Amplifier]]
* [[Gibson Epiphone Electric Guitar]]
* [[Western Safety Megaphone]]
* [[Kinect]]
* [[Video Visualizer]]
* [[InfocusProjector]]
* [[Oculus LVL1]]
* [[Oculus LVL1 Nikon]]

== Tools ==
* [[Craftsmen Cordless Drill 16.8 Volt]]
* [[Milwaukee Sawzall]]
* [[KeyLessEntry]]
* [[Full Spectrum Laser]]
* [[CNC Machine]]
* [[Drill Press]]
* [[Dremel 300]]
* [[Drill bit set]]
* [[Gray Tool Kit]]
* [[Tool Cart]]
* [[GE Hotplate]]
* [[Dremel Drill Press]]
* [[iFixit 54 Piece Bit Driver Kit]]
* [[iFixit 26 Piece Bit Driver Kit]]
* [[52 Piece Racheting Wrench Kit]]
* [[32 Piece Screwdriver Kit]]
* [[Rigid WetDry Vac]]
* [[Craftsman 10 inch Tablesaw]]
* [[Craftsman 13 inch Scrollsaw]]
* [[Belt Sander]]
* [[DeWalt Compound Miter Saw]]
* [[Buffalo Wood Lathe]]
* [[Multi-Mig Welder]]
* [[Toolkraft Drill Press]]
* [[Hitachi Cordless Driver Drill]]
* [[Sewing machine]]
* [[Vacuum pump]]
* [[Heavy Duty Bandsaw]]
* [[Hitachi Hammer Drill]]
* [[Ryobi Mini Power Saw]]
* [[Ryobi Power Drill]]
* [[Ryobi Sawzaw]]
* [[Ryobi Battery Charger]]
* [[Ryobi Battery (x1)]]
* [[Black & Decker 14.4V Cordless Saw]]
* [[Black & Decker 14.4 Cordless Drill #1]]
* [[Black & Decker 14.4 Cordless Drill #2]]
* [[Black & Decker 14.4 Batteries (x3)]]
* [[Black & Decker Battery Charger]]
* [[Dewalt Battery Charger]]
* [[Black & Decker Corded Drill]]
* [[Husky Pneumatic Socket Wrench ]]
* [[Husky Pneumatic Hammer ]]
* [[Husky Pneumatic Impact Wrench ]]
* [[Husky Pneumatic Rotary Tool]]
* [[Husky Pneumatic Paint Sprayer ]]
* [[Powermate Pneumatic Nail Gun]]
* [[Pneumatic Tire Pressure Gauge and Hose]]
* [[Rotozip Rotary Tool]]
* [[Dremel 200 Series]]
* [[Dremel MultiPro]]
* [[Dremel Flex Shaft Extender]]
* [[Dremel Multi Purpose/Bench Press Stand ]]
* [[ColdHeat Battery Powered Soldering Iron]]
* [[Sperry LAN TRACKER]]
* [[Kobalt 3.6V Lithium Drill]]
* [[Ryobi 4V Lithium Drill]]
* [[Unknown Lithium Drill]]
* [[4.8V Cordless Screwdriver]]
* [[Compression Tool Kit]]
* [[Conduit Pipe Cutters (x2)]]
* [[TaskForce Corded Skill Saw]]
* [[SKIL Dual Axis Rotary Laser Level]]
* [[Masonry/Boring/Forester Bit Kits]]
* [[RJ11/RJ45 Terminating Tool]]
* [[Ideal 10/100 Terminating Punch]]
* [[CenTech Fiberglass Wiring Rods]]
* [[JET Dust Collection System ]]
* [[120 Volt 100 Amp Welder ]]
* [[Corona Machine ]]

== Kitchen ==
* [[Melitta Coffee Maker]]
* [[Kitchen Fridge]]
* [[Kenmore Microwave]]
* [[Kegerator]]
* [[Enhanced Toaster Pastry]]

== Misc ==
* [[Mr. White PC]]
* [[Guard dog]]
* [[Toms Vending Machine]]
* [[iRobot Roomba Robotic Vacuum]]
* [[Radio Teletype Machine]]
* [[Hyundai Monitor]]
* [[Toy Helicopter]]
* [[Beehive Light Show]]
* [[Star Wars Force Trainer]]
* [[Robo-Pony]]
* [[Make T-Shirts]]

== Large multiple QR sheets for mass printing ==

[[Equipment/QRCodes|Master List of QR Codes]]

[[Big Soldering Station Sticker Sheet]]

Milwaukee Sawzall

2012-01-20T20:38:55Z

Jdc928:

{{Template:Equipment
|owner=Josh Wilcox
|serial=
|model=Milwaukee 0-3200 serial #981c603481022
|arrived=1/21/2012
|doesitwork=YES
|contact=Josh Wilcox
|where=Wood Shop
}}

Milwaukee Sawzall

2012-01-20T20:38:33Z

Jdc928:

{{Template:Equipment
|owner=Josh Wilcox
|serial=
|model=Milwaukee 0-3200 serial=981c603481022
|arrived=1/21/2012
|doesitwork=YES
|contact=Josh Wilcox
|where=Wood Shop
}}

Milwaukee Sawzall

2012-01-20T20:35:29Z

Jdc928: Created page with " {{Template:Equipment |owner=Josh Wilcoxx |serial= |model=Milwaukee |arrived=1/21/2012 |doesitwork=YES |contact=Josh Wilcox |where= }}"

{{Template:Equipment
|owner=Josh Wilcoxx
|serial=
|model=Milwaukee
|arrived=1/21/2012
|doesitwork=YES
|contact=Josh Wilcox
|where=
}}

Equipment

2012-01-20T20:32:42Z

Jdc928: /* Tools */

This page is meant to be a master list for all of the equipment at LVL1. Add a wiki page link here and follow it to fill out the details. QR Code images and general information are generated with a simple MediaWiki template. Cut, paste and edit the following code into a new wiki page

<code><nowiki>
{{Template:Equipment
|owner=Owner of Loaner of equipment
|serial=Serial Number
|model=Make/Model of equipment
|arrived=When this thing first showed up
|doesitwork=Does this work or not
|contact=person to contact
|where=where is it
}}
</nowiki></code>

=== LVL1 Equipment Catalog ===

== Safety ==
* [[Fire Extinguisher]]
* [[First Aid Kit]]

== Communications ==
* [[HF Transceiver]]
* [[Satelite Modem]]
* [[Icom IC-229H 2M Transceiver]]
* [[Astron RS-20A]]

== Electronics Equipment ==
* [[Tektronix 2432 Digital Oscilloscope]]
* [[BK Dual Time Base Oscillosope]]
* [[Fluke Digital Multimeter 8000A]]
* [[Leader DC Tracking Power Supply]]
* [[Heathkit Sine-Square Audio Generator]]
* [[Sencore Capacitor Inductor Analyzer]]
* [[Bel MERIT All-In-One Instrument]]
* [[HD Tesla High Voltage Coils]]
* [[Jacob's Ladder with Enclosure]]
* [[Heathkit Oscilloscope]]
* [[Fluke 37 Multimeter]]
* [[MPJA Soldering Station]]
* [[Hitachi Oscilloscope]]

== Printing ==
* [[HP 2600n Color LaserJet]]
* [[Purple Cows Laminator]]
* [[GBC Personal Laminator]]
* [[Brother Label Maker]]
* [[Veruca Gloop|Makerbot - Veruca Gloop]]

== Audio / Video ==
* [[Onkyo AV Receiver]]
* [[KLH Audio Speakers]]
* [[Peavey Audition 30 Amplifier]]
* [[Boss Digital Reverb Pedal]]
* [[Boss Digital Delay Pedal]]
* [[Boss Dr. Rhythm Machine]]
* [[Crown CE1000 Amp]]
* [[Carvin 1584 Speaker]]
* [[Zoom Handy Recorder H2]]
* [[Harmony Electric Guitar]]
* [[Playmate Electric Guitar]]
* [[Philips Magnavox Smart Series CRT TV]]
* [[Marshall MG Series 15CD Amplifier]]
* [[Gibson Epiphone Electric Guitar]]
* [[Western Safety Megaphone]]
* [[Kinect]]
* [[Video Visualizer]]
* [[InfocusProjector]]
* [[Oculus LVL1]]
* [[Oculus LVL1 Nikon]]

== Tools ==
* [[Milwaukee Sawzall]]
* [[KeyLessEntry]]
* [[Full Spectrum Laser]]
* [[CNC Machine]]
* [[Drill Press]]
* [[Dremel 300]]
* [[Drill bit set]]
* [[Gray Tool Kit]]
* [[Tool Cart]]
* [[GE Hotplate]]
* [[Dremel Drill Press]]
* [[iFixit 54 Piece Bit Driver Kit]]
* [[iFixit 26 Piece Bit Driver Kit]]
* [[52 Piece Racheting Wrench Kit]]
* [[32 Piece Screwdriver Kit]]
* [[Rigid WetDry Vac]]
* [[Craftsman 10 inch Tablesaw]]
* [[Craftsman 13 inch Scrollsaw]]
* [[Belt Sander]]
* [[DeWalt Compound Miter Saw]]
* [[Buffalo Wood Lathe]]
* [[Multi-Mig Welder]]
* [[Toolkraft Drill Press]]
* [[Hitachi Cordless Driver Drill]]
* [[Sewing machine]]
* [[Vacuum pump]]
* [[Heavy Duty Bandsaw]]
* [[Hitachi Hammer Drill]]
* [[Ryobi Mini Power Saw]]
* [[Ryobi Power Drill]]
* [[Ryobi Sawzaw]]
* [[Ryobi Battery Charger]]
* [[Ryobi Battery (x1)]]
* [[Black & Decker 14.4V Cordless Saw]]
* [[Black & Decker 14.4 Cordless Drill #1]]
* [[Black & Decker 14.4 Cordless Drill #2]]
* [[Black & Decker 14.4 Batteries (x3)]]
* [[Black & Decker Battery Charger]]
* [[Dewalt Battery Charger]]
* [[Black & Decker Corded Drill]]
* [[Husky Pneumatic Socket Wrench ]]
* [[Husky Pneumatic Hammer ]]
* [[Husky Pneumatic Impact Wrench ]]
* [[Husky Pneumatic Rotary Tool]]
* [[Husky Pneumatic Paint Sprayer ]]
* [[Powermate Pneumatic Nail Gun]]
* [[Pneumatic Tire Pressure Gauge and Hose]]
* [[Rotozip Rotary Tool]]
* [[Dremel 200 Series]]
* [[Dremel MultiPro]]
* [[Dremel Flex Shaft Extender]]
* [[Dremel Multi Purpose/Bench Press Stand ]]
* [[ColdHeat Battery Powered Soldering Iron]]
* [[Sperry LAN TRACKER]]
* [[Kobalt 3.6V Lithium Drill]]
* [[Ryobi 4V Lithium Drill]]
* [[Unknown Lithium Drill]]
* [[4.8V Cordless Screwdriver]]
* [[Compression Tool Kit]]
* [[Conduit Pipe Cutters (x2)]]
* [[TaskForce Corded Skill Saw]]
* [[SKIL Dual Axis Rotary Laser Level]]
* [[Masonry/Boring/Forester Bit Kits]]
* [[RJ11/RJ45 Terminating Tool]]
* [[Ideal 10/100 Terminating Punch]]
* [[CenTech Fiberglass Wiring Rods]]
* [[JET Dust Collection System ]]
* [[120 Volt 100 Amp Welder ]]
* [[Corona Machine ]]

== Kitchen ==
* [[Melitta Coffee Maker]]
* [[Kitchen Fridge]]
* [[Kenmore Microwave]]
* [[Kegerator]]
* [[Enhanced Toaster Pastry]]

== Misc ==
* [[Mr. White PC]]
* [[Guard dog]]
* [[Toms Vending Machine]]
* [[iRobot Roomba Robotic Vacuum]]
* [[Radio Teletype Machine]]
* [[Hyundai Monitor]]
* [[Toy Helicopter]]
* [[Beehive Light Show]]
* [[Star Wars Force Trainer]]
* [[Robo-Pony]]
* [[Make T-Shirts]]

== Large multiple QR sheets for mass printing ==

[[Equipment/QRCodes|Master List of QR Codes]]

[[Big Soldering Station Sticker Sheet]]

Space Update Log

2012-01-19T04:43:38Z

Jdc928: /* Update Log sent to user */

==Overview==
The space update log is a system to allow members to be notified of events that have happened at the space.
When a member is detected at the space (see member occupancy), a message is sent to user via Gtalk, Email, phone-call or sms with a log of events that have occurred since they last visited the space. 
Members can add updates or issues to the Updates Log by simply speaking to Mother via the GTalk.

==Examples==
===Posting an Update via Gtalk===
Member: Hello Mother 
MOTHER: Hello Jonathan 
Member: Update, I just fixed the laser cutter 
MOTHER: Update Recorded. Thanks. 

===Update Log sent to user===
MOTHER: Hello Jonathan. Here's whats happened since you were last here: 
01/03 - Laser cutter damaged. Needs repair 
01/03 - Roombas installed in Main Room 
01/05 - Items for recycling were picked up 
01/08 - John Doe became member! 
01/12 - Laser Cutter Repaired

Space Update Log

2012-01-19T04:43:28Z

Jdc928: /* Posting an Update via Gtalk */

==Overview==
The space update log is a system to allow members to be notified of events that have happened at the space.
When a member is detected at the space (see member occupancy), a message is sent to user via Gtalk, Email, phone-call or sms with a log of events that have occurred since they last visited the space. 
Members can add updates or issues to the Updates Log by simply speaking to Mother via the GTalk.

==Examples==
===Posting an Update via Gtalk===
Member: Hello Mother 
MOTHER: Hello Jonathan 
Member: Update, I just fixed the laser cutter 
MOTHER: Update Recorded. Thanks. 

===Update Log sent to user===
MOTHER: Hello Jonathan. Here's whats happened since you were last here:
01/03 - Laser cutter damaged. Needs repair
01/03 - Roombas installed in Main Room
01/05 - Items for recycling were picked up
01/08 - John Doe became member!
01/12 - Laser Cutter Repaired

Space Update Log

2012-01-19T04:42:49Z

Jdc928:

==Overview==
The space update log is a system to allow members to be notified of events that have happened at the space.
When a member is detected at the space (see member occupancy), a message is sent to user via Gtalk, Email, phone-call or sms with a log of events that have occurred since they last visited the space. 
Members can add updates or issues to the Updates Log by simply speaking to Mother via the GTalk.

==Examples==
===Posting an Update via Gtalk===
Member: Hello Mother
MOTHER: Hello Jonathan
Member: Update, I just fixed the laser cutter
MOTHER: Update Recorded. Thanks.

===Update Log sent to user===
MOTHER: Hello Jonathan. Here's whats happened since you were last here:
01/03 - Laser cutter damaged. Needs repair
01/03 - Roombas installed in Main Room
01/05 - Items for recycling were picked up
01/08 - John Doe became member!
01/12 - Laser Cutter Repaired

Space Update Log

2012-01-19T04:42:30Z

Jdc928: Created page with "==Overview== The space update log is a system to allow members to be notified of events that have happened at the space. When a member is detected at the space (see member occupa..."

==Overview==
The space update log is a system to allow members to be notified of events that have happened at the space.
When a member is detected at the space (see member occupancy), a message is sent to user via Gtalk, Email, phone-call or sms with a log of events that have occurred since they last visited the space. 
Members can add updates or issues to the Updates Log by simply speaking to Mother via the GTalk.

==Examples==
===Posting an Update via Gtalk==
Member: Hello Mother
MOTHER: Hello Jonathan
Member: Update, I just fixed the laser cutter
MOTHER: Update Recorded. Thanks.

===Update Log sent to user===
MOTHER: Hello Jonathan. Here's whats happened since you were last here:
01/03 - Laser cutter damaged. Needs repair
01/03 - Roombas installed in Main Room
01/05 - Items for recycling were picked up
01/08 - John Doe became member!
01/12 - Laser Cutter Repaired

Mother - Monitored and Controllable Systems to implement

2012-01-19T04:33:07Z

Jdc928: /* Systems to Implement */

==Mother Navigation==
[[MotherStatus]] | [[Mother To-Do List]] | [[Mother Wish List]] | [[MotherMain]]

==Systems to Implement==
*<del>[[Mother Arduino]]</del>
*[[Space Update Log]]

Occupancy Monitoring & Graphing

2012-01-18T23:16:49Z

Jdc928:

==Mother Navigation==
[[MotherStatus]] | [[Mother To-Do List]] | [[Mother Wish List]] | [[MotherMain]]
==Occupancy/Activity System Overview==
MOTHER uses the status of various PIR Motion Sensors (connected through the DSC Security System) and networked attached devices, to monitor and detect individual occupancy and total activity levels of the entire space as well as individual areas of the space. These occupancy and activity levels are recorded and graphed for analysis and notifications.

==Activity Measurements==
Space Activity, referred to as HACKTIVITY, is measured using two methods:
*Current Hacktivity Level (Compare to a measurement of speed or "How Fast")
**Current Hacktivity is measured in units of "Jons"
*** A "Jon" is equal to 1m/s of activity in a Five minute time period
*Amount of Activity (Compare to a measurement of distance or "How Far"
**Total Hacktivity is measured in units of "Clarks"
***A Clark is equal to 1m/s of activity

==Values Calculated and Graphed==
*Todays Current Hacktivity Speed
*Todays Hacktivity Distance
*Todays Peek Hacktivity Speed

*This Weeks Hacktivity Distance
*This Weeks Peek Hacktivity Speed

*This Months Hacktivity Distance
*This Months Peek Hacktivity Speed

*All Time Peek Hacktivity Speed
*All Time Peek Daily Activity Distance
*All Time Peek Weekly Activity Distance
*All Time Peek Monthly Activity Distance

==Running Averages Calculated==
*Running Average of Current Hacktivity Speed
*Running Average of Weekly Hactivity Distance
*Running Average of Monthly Hacktivity Distance

*Running Average of Mon Hacktivity Speed
*Running Average of Tuesday Hacktivity Speed
*Running Average of Wed Hacktivity Speed
*Running Average of Thurs Hacktivity Speed
*Running Average of Fri Hacktivity Speed

Occupancy Monitoring & Graphing

2012-01-18T23:15:00Z

Jdc928: Created page with "==Occupancy/Activity System Overview== MOTHER uses the status of various PIR Motion Sensors (connected through the DSC Security System) and networked attached devices, to monitor..."

==Occupancy/Activity System Overview==
MOTHER uses the status of various PIR Motion Sensors (connected through the DSC Security System) and networked attached devices, to monitor and detect individual occupancy and total activity levels of the entire space as well as individual areas of the space. These occupancy and activity levels are recorded and graphed for analysis and notifications.

==Activity Measurements==
Space Activity, referred to as HACKTIVITY, is measured using two methods:
*Current Hacktivity Level (Compare to a measurement of speed or "How Fast")
**Current Hacktivity is measured in units of "Jons"
*** A "Jon" is equal to 1m/s of activity in a Five minute time period
*Amount of Activity (Compare to a measurement of distance or "How Far"
**Total Hacktivity is measured in units of "Clarks"
***A Clark is equal to 1m/s of activity

==Values Calculated and Graphed==
*Todays Current Hacktivity Speed
*Todays Hacktivity Distance
*Todays Peek Hacktivity Speed

*This Weeks Hacktivity Distance
*This Weeks Peek Hacktivity Speed

*This Months Hacktivity Distance
*This Months Peek Hacktivity Speed

*All Time Peek Hacktivity Speed
*All Time Peek Daily Activity Distance
*All Time Peek Weekly Activity Distance
*All Time Peek Monthly Activity Distance

==Running Averages Calculated==
*Running Average of Current Hacktivity Speed
*Running Average of Weekly Hactivity Distance
*Running Average of Monthly Hacktivity Distance

*Running Average of Mon Hacktivity Speed
*Running Average of Tuesday Hacktivity Speed
*Running Average of Wed Hacktivity Speed
*Running Average of Thurs Hacktivity Speed
*Running Average of Fri Hacktivity Speed

MotherStatus

2012-01-18T22:56:47Z

Jdc928: /* Monitored and Controllable Systems */

==Mother Navigation==
[[MotherStatus]] | [[Mother To-Do List]] | [[Mother Wish List]] | [[MotherMain]]

==Integrated Systems==
===Monitored and Controllable Systems===
*[[DSC Security System]]
*SqueezeCenter Distributed Media Server
*[[Mother Google Talk System]]
*Mother Email System
*Mother SIP Phone system
*Mother Speech System
*[[Mother Arduino]]
*[[Occupancy Monitoring & Graphing]]
[[Mother - Monitored and Controllable Systems to implement]]

===Monitor Only Systems===
*Weather Station Database
*LVL1 LAN Network
*LVL1 Group Calendars
[[Mother - Monitor Only Systems to Implement]]

===Control Only Systems===
*LED Signs System
[[Mother - Control Only Systems to Implement]]

==Front Ends==
===Web Interface===
*Mother Main Web Interface
*Mother Guest Web View
*Mother Pachube Charts

===Touch Interfaces===
*HSTouch

===Mobile Interfaces===
*Android/iPhone HSTouch
*Mobile Friendly Web Interface

==Device Types Being Monitored==
*All LVL1 networked equipment
*Various Members Networked Devices
*Various PIR Motions throughout LVL1 Space
*Various Door sensors throughout LVL1 Space
*Weather information for Louisville KY
*Weather information for Spaceport IN
*Current media related information per each media zone
*Multiple SIP Extensions
*Mother Email related information
*Online Gtalk users
*RSS Data Feeds
*LVL1 Group Calendar Events
[[Mother - Device Types to Implement]]

==Current "Stable" Space Scenes==
===Audio Scenes===
====Womp Womp Womp====
*Set Main room audio levels
*Set Main room audio zone to Dubstep

==Current "Stable" Events==
===Notifications===
====Green Notifications====
*Notification of Unknown Device on LVL1 network
*Notification of space occupancy change
[[Mother - Notifications to implement]]

===Occupancy===
*Logging of all occupancy devices to online database and graphing
[[Mother - Occupancy Events to Implement]]

===Hacktivity===
*Maintenance and Resetting of all Jon and Clark gushes and counters
[[Mother - Hacktivity Events to Implement]]

MemberRegistration

2012-01-18T22:41:23Z

Jdc928:

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==Task to perform upon registration of new member==
*Member Registration forms need completed and delivered to the secretary (Possible automation by online form with single signature card
*Obtaining of ID and Credentials (Could be an upload image box on the web based form)
*Adding member to the appropriate email/group list. (Strong suggestion to start transitioning to GoogleAppsDomains to handle a LARGE majority of New Member Registration. A lot of our member services can be set up to automatically allow access to anyone with a "lvl1.org" email address)
*Assigning new member an RFID card
*Ensuring recurring payment registration
*Member details inserted into Member Database
*Auto-link member appsdomain account with lvl1 wordpress/wiki access
*"Potential" - Allow member to fill out opt-in profile for Mother Stuff (viewing of space status, communication with mother, etc...)
*Scheduling date 3 months from day of registration to move member from provisional to "non-provisional" member. (Possible issuing of Hard Key)

O&D Current Actions

2012-01-18T22:41:02Z

Jdc928: /* Officer/Directors Links */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==Things to Do (Current)==
===501(c)3 Status===
Current Status: Waiting for Response 
Details and Log of application status here: [[501c3]]

===Director Goals===
During our first meeting of 2012, we all discussed the idea of each of the directors spending the next few weeks thinking about some specific aspects of LVL1 that they would like focus on improving and set some actions in place to help do so. These aspects should be related to those that directly relate to our Mission Statement, like Membership growth, Space Safety, Space HAPPINESS?, community involvement, etc.. The directors are not necessarily responsible for completing these goals but should take some initiative to make sure there is always some progress happening on these projects. (The idea is to NEVER exclude members from these projects or any other, but rather highly encourage any and all members to be involoved)

===Get Business Cards for LVL1===
We need to get prices and explore the options of getting directors personalized business cards as well as general business cards that can be used by all members of the space to help promote LVL1. The president of LVL1 needs to have personalized business cards at all times.
*Get price quotes for Generic Non-personalized cards
*Get prices for personalized cards

===<del>Create LVL1 Wiki Directors Pages</del>===
*(Jon Strike-through on 1/18)
We need to make some pages that will help the directors document and track the issues and task we are working on. These pages will also serve as a means to make these discussions and actions available to the all the members of LVL1 as well

==Things to Do (Future/Plan)==
===New Member Automation===
Automation of all actions required to take place upon the registration of a new member. 
Full details here:[[ MemberRegistration]]

===Visitor Registration Automation===
System for collecting visitor information. Possible solutions include touch screen form at front door. 
Full details here: [[VisitorRegistration]]

===Visitor Follow-Up===
Process by which we can follow up with visitors in an effort to find out what they thought about the space. We want this to be as non-invasive as possible. 
Full details here: [[VisitorFollowUp]]

===Upgrading LVL1 "Store"/"Vending" setup and items===
Re-vamping the LVL1 "Store" items. Removing of low-cost "consumables" and including more "Kit" based items. 
Full Details here: [[LVL1Store]]

==Directors Goals==
Directors: If you decide there is an area you would like to focus on then add it here.
===Jonathan Clark===
I would like to dedicate a majority of my time as a Director on improving the functionality and atmosphere of the space. I believe in having a very open, do-what-you-want, type of environment at Lvl1, but think there is a lot we can do to make everyone's time at the space more efficient and enjoyable. No one wants to spend half of their "LVL1 time" looking for items, cleaning others messes, or feeling in any other way, less then enthusiastic about visiting the space.

I also think the quality of our space, and functions of our space have a great impact on visitors and potential members. Visitors should see a community that works together to function in a way that makes them want to be a part of our super awesomeness. I think we could use some improvement in these areas as we continue to grow. With that being said, I would describe my "Directors" goal to be the following:

====Area of Focus: "Quality of Life" @ the Space====
Goals (Ordered in Priority):
* Finish implementing and setting up the Donations,Equipment, and Loans Guidelines.
* Work on implementing volunteer basis chore assistance.
* Create and Encourage "Permanent Project" displays
* Refine and Revive Area Host System

O&D Current Actions

2012-01-18T22:40:02Z

Jdc928: /* New Member Automation */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==Things to Do (Current)==
===501(c)3 Status===
Current Status: Waiting for Response 
Details and Log of application status here: [[501c3]]

===Director Goals===
During our first meeting of 2012, we all discussed the idea of each of the directors spending the next few weeks thinking about some specific aspects of LVL1 that they would like focus on improving and set some actions in place to help do so. These aspects should be related to those that directly relate to our Mission Statement, like Membership growth, Space Safety, Space HAPPINESS?, community involvement, etc.. The directors are not necessarily responsible for completing these goals but should take some initiative to make sure there is always some progress happening on these projects. (The idea is to NEVER exclude members from these projects or any other, but rather highly encourage any and all members to be involoved)

===Get Business Cards for LVL1===
We need to get prices and explore the options of getting directors personalized business cards as well as general business cards that can be used by all members of the space to help promote LVL1. The president of LVL1 needs to have personalized business cards at all times.
*Get price quotes for Generic Non-personalized cards
*Get prices for personalized cards

===<del>Create LVL1 Wiki Directors Pages</del>===
*(Jon Strike-through on 1/18)
We need to make some pages that will help the directors document and track the issues and task we are working on. These pages will also serve as a means to make these discussions and actions available to the all the members of LVL1 as well

==Things to Do (Future/Plan)==
==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

===New Member Automation===
Automation of all actions required to take place upon the registration of a new member. 
Full details here:[[ MemberRegistration]]

===Visitor Registration Automation===
System for collecting visitor information. Possible solutions include touch screen form at front door. 
Full details here: [[VisitorRegistration]]

===Visitor Follow-Up===
Process by which we can follow up with visitors in an effort to find out what they thought about the space. We want this to be as non-invasive as possible. 
Full details here: [[VisitorFollowUp]]

===Upgrading LVL1 "Store"/"Vending" setup and items===
Re-vamping the LVL1 "Store" items. Removing of low-cost "consumables" and including more "Kit" based items. 
Full Details here: [[LVL1Store]]

==Directors Goals==
Directors: If you decide there is an area you would like to focus on then add it here.
===Jonathan Clark===
I would like to dedicate a majority of my time as a Director on improving the functionality and atmosphere of the space. I believe in having a very open, do-what-you-want, type of environment at Lvl1, but think there is a lot we can do to make everyone's time at the space more efficient and enjoyable. No one wants to spend half of their "LVL1 time" looking for items, cleaning others messes, or feeling in any other way, less then enthusiastic about visiting the space.

I also think the quality of our space, and functions of our space have a great impact on visitors and potential members. Visitors should see a community that works together to function in a way that makes them want to be a part of our super awesomeness. I think we could use some improvement in these areas as we continue to grow. With that being said, I would describe my "Directors" goal to be the following:

====Area of Focus: "Quality of Life" @ the Space====
Goals (Ordered in Priority):
* Finish implementing and setting up the Donations,Equipment, and Loans Guidelines.
* Work on implementing volunteer basis chore assistance.
* Create and Encourage "Permanent Project" displays
* Refine and Revive Area Host System

VisitorRegistration

2012-01-18T22:39:45Z

Jdc928:

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==Visitor Registration==
JonC: Some ideas Im jotting down just so I don't forget to mention.
*Allowing all visitors to register a "Visitor Account"
*Visitors can request an RFID card (with NO space access), but that they can sign into the space with when the make return visits and use for access to equipment they have completed training on.
**First RFID card cost nothing. Some form of cost for repeated lost cards. Nominal fee to cover card cost (I believe, I can get these cards for under a buck)

VisitorRegistration

2012-01-18T22:38:53Z

Jdc928: Created page with "==Visitor Registration== JonC: Some ideas Im jotting down just so I don't forget to mention. *Allowing all visitors to register a "Visitor Account" *Visitors can request an RFID ..."

==Visitor Registration==
JonC: Some ideas Im jotting down just so I don't forget to mention.
*Allowing all visitors to register a "Visitor Account"
*Visitors can request an RFID card (with NO space access), but that they can sign into the space with when the make return visits and use for access to equipment they have completed training on.
**First RFID card cost nothing. Some form of cost for repeated lost cards. Nominal fee to cover card cost (I believe, I can get these cards for under a buck)

MemberRegistration

2012-01-18T22:33:58Z

Jdc928: /* Task to perform upon registration of new member */

==Task to perform upon registration of new member==
*Member Registration forms need completed and delivered to the secretary (Possible automation by online form with single signature card
*Obtaining of ID and Credentials (Could be an upload image box on the web based form)
*Adding member to the appropriate email/group list. (Strong suggestion to start transitioning to GoogleAppsDomains to handle a LARGE majority of New Member Registration. A lot of our member services can be set up to automatically allow access to anyone with a "lvl1.org" email address)
*Assigning new member an RFID card
*Ensuring recurring payment registration
*Member details inserted into Member Database
*Auto-link member appsdomain account with lvl1 wordpress/wiki access
*"Potential" - Allow member to fill out opt-in profile for Mother Stuff (viewing of space status, communication with mother, etc...)
*Scheduling date 3 months from day of registration to move member from provisional to "non-provisional" member. (Possible issuing of Hard Key)

MemberRegistration

2012-01-18T22:33:10Z

Jdc928: /* Task to perform upon registration of new member */

==Task to perform upon registration of new member==
*Member Registration forms need completed and delivered to the secretary (Possible automation by online form with single signature card
*Obtaining of ID and Credentials (Could be an upload image box on the web based form)
*Adding member to the appropriate email/group list. (Strong suggestion to start transitioning to GoogleAppsDomains to handle a LARGE majority of New Member Registration. A lot of our member services can be set up to automatically allow access to anyone with a "lvl1.org" email address)
*Assigning new member an RFID card
*Member details inserted into Member Database
*Auto-link member appsdomain account with lvl1 wordpress/wiki access
*"Potential" - Allow member to fill out opt-in profile for Mother Stuff (viewing of space status, communication with mother, etc...)
*Scheduling date 3 months from day of registration to move member from provisional to "non-provisional" member. (Possible issuing of Hard Key)

MemberRegistration

2012-01-18T22:31:11Z

Jdc928: Created page with "==Task to perform upon registration of new member== *Member Registration forms need completed and delivered to the secretary (Possible automation by online form with single signa..."

==Task to perform upon registration of new member==
*Member Registration forms need completed and delivered to the secretary (Possible automation by online form with single signature card
*Obtaining of ID and Credentials (Could be an upload image box on the web based form)
*Adding member to the appropriate email/group list. (Strong suggestion to start transitioning to GoogleAppsDomains to handle a LARGE majority of New Member Registration. A lot of our member services can be set up to automatically allow access to anyone with a "lvl1.org" email address)
*Assigning new member an RFID card
*Scheduling date 3 months from day of registration to move member from provisional to "non-provisional" member. (Possible issuing of Hard Key)

O&D Current Actions

2012-01-18T22:25:11Z

Jdc928: /* Directors Goals */

==Officer/Directors Links==
[[Officers_and_Directors]] | [[O&D Overview]] | [[O&D Meetings]] | [[O&D Current Actions]]

==Things to Do (Current)==
===501(c)3 Status===
Current Status: Waiting for Response 
Details and Log of application status here: [[501c3]]

===Director Goals===
During our first meeting of 2012, we all discussed the idea of each of the directors spending the next few weeks thinking about some specific aspects of LVL1 that they would like focus on improving and set some actions in place to help do so. These aspects should be related to those that directly relate to our Mission Statement, like Membership growth, Space Safety, Space HAPPINESS?, community involvement, etc.. The directors are not necessarily responsible for completing these goals but should take some initiative to make sure there is always some progress happening on these projects. (The idea is to NEVER exclude members from these projects or any other, but rather highly encourage any and all members to be involoved)

===Get Business Cards for LVL1===
We need to get prices and explore the options of getting directors personalized business cards as well as general business cards that can be used by all members of the space to help promote LVL1. The president of LVL1 needs to have personalized business cards at all times.
*Get price quotes for Generic Non-personalized cards
*Get prices for personalized cards

===<del>Create LVL1 Wiki Directors Pages</del>===
*(Jon Strike-through on 1/18)
We need to make some pages that will help the directors document and track the issues and task we are working on. These pages will also serve as a means to make these discussions and actions available to the all the members of LVL1 as well

==Things to Do (Future/Plan)==
===New Member Automation===
Automation of all actions required to take place upon the registration of a new member. 
Full details here:[[ MemberRegistration]]

===Visitor Registration Automation===
System for collecting visitor information. Possible solutions include touch screen form at front door. 
Full details here: [[VisitorRegistration]]

===Visitor Follow-Up===
Process by which we can follow up with visitors in an effort to find out what they thought about the space. We want this to be as non-invasive as possible. 
Full details here: [[VisitorFollowUp]]

===Upgrading LVL1 "Store"/"Vending" setup and items===
Re-vamping the LVL1 "Store" items. Removing of low-cost "consumables" and including more "Kit" based items. 
Full Details here: [[LVL1Store]]

==Directors Goals==
Directors: If you decide there is an area you would like to focus on then add it here.
===Jonathan Clark===
I would like to dedicate a majority of my time as a Director on improving the functionality and atmosphere of the space. I believe in having a very open, do-what-you-want, type of environment at Lvl1, but think there is a lot we can do to make everyone's time at the space more efficient and enjoyable. No one wants to spend half of their "LVL1 time" looking for items, cleaning others messes, or feeling in any other way, less then enthusiastic about visiting the space.

I also think the quality of our space, and functions of our space have a great impact on visitors and potential members. Visitors should see a community that works together to function in a way that makes them want to be a part of our super awesomeness. I think we could use some improvement in these areas as we continue to grow. With that being said, I would describe my "Directors" goal to be the following:

====Area of Focus: "Quality of Life" @ the Space====
Goals (Ordered in Priority):
* Finish implementing and setting up the Donations,Equipment, and Loans Guidelines.
* Work on implementing volunteer basis chore assistance.
* Create and Encourage "Permanent Project" displays
* Refine and Revive Area Host System

O&D Current Actions

2012-01-18T22:24:08Z

Jdc928: /* Upgrading LVL1 "Store"/"Vending" setup and items */

O&D Current Actions

2012-01-18T22:23:00Z

Jdc928: /* Visitor Follow-Up */

O&D Current Actions

2012-01-18T22:22:50Z

Jdc928: /* Visitor Follow-Up */

O&D Current Actions

2012-01-18T22:21:38Z

Jdc928: /* Visitor Registration Automation */