Xerox Workcentre M20i

From LVL1
Revision as of 11:32, 20 March 2019 by Notyou007a (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Back to list of Equipment

Lvl1 qr header.png
Xerox_Workcentre_M20i&.png

General

LVL1 has three Ender 3 printers available for general use.

  • Owner/Loaner: LVL1
  • Serial Number: MISC
  • Make/Model: Standard/Pro
  • Arrival Date: 1/12/24
  • Usability: Yes
  • Contact: Matt, Kevin, Paul
  • Where: 3D Printing
Ender 3 Printers


Firmware

Matt has compiled a firmware for our Ender 3s:

One drive link to .bin files

Connecting

The printer has a static address assignment at 10.0.1.17. Popular Linux distros include drivers.

Installation guide: [1]

Network Share/Downloads/Xerox m20i has the drivers for Win 7 x64

Scanning

Someone should set up network scanning!

  • The M20i does not support native network scanning, and the scan to local computer through USB has not worked on Windows, Mac or Linux builds; there seems to be a problem with the firmware/hardware (something internal?) to drive the USB port on the scanner. The scanner supports a 'scan to email' through a local SMTP server setup; this would be the next step in getting this device ready to scan to the network. -Ned
  • The M20i scan-to-email functionality limits the size of scans to 4mb, which is pretty small, and so I have stopped investigating getting this up and running, because it will probably yeild only low quality scans. -Ned