Difference between revisions of "WeatherStationDemoCode"

From LVL1
Jump to navigation Jump to search
Line 1: Line 1:
<nowiki>Insert non-formatted text here
+
<code>
  
 
/**The MIT License (MIT)
 
/**The MIT License (MIT)
Line 396: Line 396:
  
  
</nowiki>
+
</code>

Revision as of 21:47, 25 February 2020

/**The MIT License (MIT)

Copyright (c) 2018 by Daniel Eichhorn - ThingPulse

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

See more at https://thingpulse.com

  • /


/*

*  this code has been modified for the LVL1 Hackerspace
*  workshop on making a weather station that is 
*  specific to Louisville, KY and also has the ability to
*  connect to 3 specific WIFI nets
*  Also this code uses the 1.3"oled that uses the sh1106Wire library
*  Brian Wagner 2/23/20
*  
*/
  1. include <Arduino.h>
  1. include <ESPWiFi.h>
  2. include <ESPHTTPClient.h>
  3. include <JsonListener.h>

// time

  1. include <time.h> // time() ctime()
  2. include <sys/time.h> // struct timeval
  3. include <coredecls.h> // settimeofday_cb()
  1. include "SSD1306Wire.h"
  2. include "OLEDDisplayUi.h"
  3. include "Wire.h"
  4. include "OpenWeatherMapCurrent.h"
  5. include "OpenWeatherMapForecast.h"
  6. include "WeatherStationFonts.h"
  7. include "WeatherStationImages.h"
  1. include "SH1106Wire.h"


/***************************

* Begin Settings
**************************/

// WIFI const char* WIFI_SSID1 = "lvl1"; const char* WIFI_PWD1 = "whatpassword";

//change these to your work and/or home wifi networks const char* WIFI_SSID2 = "ssd1"; const char* WIFI_PWD2 = "pass2";

const char* WIFI_SSID3 = "ssd2"; const char* WIFI_PWD3 = "pass2";


  1. define TZ -6 // (utc+) TZ in hours

//-6 is eastern... Louisville time

  1. define H24 1 //0 if 24 hour 1 if not
  1. define DST_MN 60 // use 60mn for summer time in some countries

// Setup const int UPDATE_INTERVAL_SECS = 20 * 60; // Update every 20 minutes

// Display Settings const int I2C_DISPLAY_ADDRESS = 0x3c;

  1. if defined(ESP8266)

const int SDA_PIN = D3; const int SDC_PIN = D4;

  1. else

const int SDA_PIN = 5; //D3; const int SDC_PIN = 4; //D4;

  1. endif


// OpenWeatherMap Settings // Sign up here to get an API key: // https://docs.thingpulse.com/how-tos/openweathermap-key/ String OPEN_WEATHER_MAP_APP_ID = "12345678"; /* Go to https://openweathermap.org/find?q= and search for a location. Go through the result set and select the entry closest to the actual location you want to display data for. It'll be a URL like https://openweathermap.org/city/2657896. The number at the end is what you assign to the constant below.

*/

String OPEN_WEATHER_MAP_LOCATION_ID = "4299276"; //louisville

// Pick a language code from this list: // Arabic - ar, Bulgarian - bg, Catalan - ca, Czech - cz, German - de, Greek - el, // English - en, Persian (Farsi) - fa, Finnish - fi, French - fr, Galician - gl, // Croatian - hr, Hungarian - hu, Italian - it, Japanese - ja, Korean - kr, // Latvian - la, Lithuanian - lt, Macedonian - mk, Dutch - nl, Polish - pl, // Portuguese - pt, Romanian - ro, Russian - ru, Swedish - se, Slovak - sk, // Slovenian - sl, Spanish - es, Turkish - tr, Ukrainian - ua, Vietnamese - vi, // Chinese Simplified - zh_cn, Chinese Traditional - zh_tw. String OPEN_WEATHER_MAP_LANGUAGE = "en"; const uint8_t MAX_FORECASTS = 4;

const boolean IS_METRIC = false;

// Adjust according to your language const String WDAY_NAMES[] = {"SUN", "MON", "TUE", "WED", "THU", "FRI", "SAT"}; const String MONTH_NAMES[] = {"JAN", "FEB", "MAR", "APR", "MAY", "JUN", "JUL", "AUG", "SEP", "OCT", "NOV", "DEC"};

/***************************

* End Settings
**************************/
// Initialize the oled display for address 0x3c
// sda-pin=14 and sdc-pin=12
SH1106Wire     display(I2C_DISPLAY_ADDRESS, SDA_PIN, SDC_PIN);
OLEDDisplayUi   ui( &display );

OpenWeatherMapCurrentData currentWeather; OpenWeatherMapCurrent currentWeatherClient;

OpenWeatherMapForecastData forecasts[MAX_FORECASTS]; OpenWeatherMapForecast forecastClient;

  1. define TZ_MN ((TZ)*60)
  2. define TZ_SEC ((TZ)*3600)
  3. define DST_SEC ((DST_MN)*60)

time_t now;

// flag changed in the ticker function every 10 minutes bool readyForWeatherUpdate = false;

String lastUpdate = "--";

long timeSinceLastWUpdate = 0;

//declaring prototypes void drawProgress(OLEDDisplay *display, int percentage, String label); void updateData(OLEDDisplay *display); void drawDateTime(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y); void drawCurrentWeather(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y); void drawForecast(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y); void drawForecastDetails(OLEDDisplay *display, int x, int y, int dayIndex); void drawHeaderOverlay(OLEDDisplay *display, OLEDDisplayUiState* state); void setReadyForWeatherUpdate();


// Add frames // this array keeps function pointers to all frames // frames are the single views that slide from right to left FrameCallback frames[] = { drawDateTime, drawCurrentWeather, drawForecast }; int numberOfFrames = 3;

OverlayCallback overlays[] = { drawHeaderOverlay }; int numberOfOverlays = 1;

void setup() {

 Serial.begin(115200);
 Serial.println();
 Serial.println();
 // initialize dispaly
 display.init();
 display.clear();
 display.display();
 //display.flipScreenVertically();
 display.setFont(ArialMT_Plain_10);
 display.setTextAlignment(TEXT_ALIGN_CENTER);
 display.setContrast(255);
 WiFi.begin(WIFI_SSID1, WIFI_PWD1);
 String wifiMsg = "Trying wifi 1";
 int counter = 0;
 while (WiFi.status() != WL_CONNECTED) {
   delay(500);
   Serial.print(".");
   display.clear();
   display.drawString(64, 10, wifiMsg );
   display.drawXbm(46, 30, 8, 8, counter % 3 == 0 ? activeSymbole : inactiveSymbole);
   display.drawXbm(60, 30, 8, 8, counter % 3 == 1 ? activeSymbole : inactiveSymbole);
   display.drawXbm(74, 30, 8, 8, counter % 3 == 2 ? activeSymbole : inactiveSymbole);
   display.display();
   counter++;
   if (counter ==15) {
       WiFi.begin(WIFI_SSID2, WIFI_PWD2);
       wifiMsg = "Trying wifi 2";
   }
   if (counter == 30) {
       WiFi.begin(WIFI_SSID3, WIFI_PWD3);
       wifiMsg = "Trying wifi 3";
   }
   if (counter == 45) {
       WiFi.begin(WIFI_SSID1, WIFI_PWD1);
       wifiMsg = "Trying wifi 1";
       counter = 0;
   }
   
 }
 delay(500);


 // Get time from network time service
 configTime(TZ_SEC, DST_SEC, "pool.ntp.org");
 ui.setTargetFPS(30);
 ui.setActiveSymbol(activeSymbole);
 ui.setInactiveSymbol(inactiveSymbole);
 // You can change this to
 // TOP, LEFT, BOTTOM, RIGHT
 ui.setIndicatorPosition(BOTTOM);
 // Defines where the first frame is located in the bar.
 ui.setIndicatorDirection(LEFT_RIGHT);
 // You can change the transition that is used
 // SLIDE_LEFT, SLIDE_RIGHT, SLIDE_TOP, SLIDE_DOWN
 ui.setFrameAnimation(SLIDE_LEFT);
 ui.setFrames(frames, numberOfFrames);
 ui.setOverlays(overlays, numberOfOverlays);
 // Inital UI takes care of initalising the display too.
 ui.init();
 Serial.println("");
 updateData(&display);

}

void loop() {

 if (millis() - timeSinceLastWUpdate > (1000L*UPDATE_INTERVAL_SECS)) {
   setReadyForWeatherUpdate();
   timeSinceLastWUpdate = millis();
 }
 if (readyForWeatherUpdate && ui.getUiState()->frameState == FIXED) {
   updateData(&display);
 }
 int remainingTimeBudget = ui.update();
 if (remainingTimeBudget > 0) {
   // You can do some work here
   // Don't do stuff if you are below your
   // time budget.
   delay(remainingTimeBudget);
 }


}

void drawProgress(OLEDDisplay *display, int percentage, String label) {

 display->clear();
 display->setTextAlignment(TEXT_ALIGN_CENTER);
 display->setFont(ArialMT_Plain_10);
 display->drawString(64, 10, label);
 display->drawProgressBar(2, 28, 124, 10, percentage);
 display->display();

}

void updateData(OLEDDisplay *display) {

 drawProgress(display, 10, "Updating time...");
 drawProgress(display, 30, "Updating weather...");
 currentWeatherClient.setMetric(IS_METRIC);
 currentWeatherClient.setLanguage(OPEN_WEATHER_MAP_LANGUAGE);
 currentWeatherClient.updateCurrentById(&currentWeather, OPEN_WEATHER_MAP_APP_ID, OPEN_WEATHER_MAP_LOCATION_ID);
 drawProgress(display, 50, "Updating forecasts...");
 forecastClient.setMetric(IS_METRIC);
 forecastClient.setLanguage(OPEN_WEATHER_MAP_LANGUAGE);
 uint8_t allowedHours[] = {12};
 forecastClient.setAllowedHours(allowedHours, sizeof(allowedHours));
 forecastClient.updateForecastsById(forecasts, OPEN_WEATHER_MAP_APP_ID, OPEN_WEATHER_MAP_LOCATION_ID, MAX_FORECASTS);
 readyForWeatherUpdate = false;
 drawProgress(display, 100, "Done...");
 delay(1000);

}


void drawDateTime(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y) {

 now = time(nullptr);
 struct tm* timeInfo;
 timeInfo = localtime(&now);
 char buff[16];


 display->setTextAlignment(TEXT_ALIGN_CENTER);
 display->setFont(ArialMT_Plain_10);
 String date = WDAY_NAMES[timeInfo->tm_wday];
 sprintf_P(buff, PSTR("%s, %02d/%02d/%04d"), WDAY_NAMES[timeInfo->tm_wday].c_str(), timeInfo->tm_mday, timeInfo->tm_mon+1, timeInfo->tm_year + 1900);
 display->drawString(64 + x, 5 + y, String(buff));
 display->setFont(ArialMT_Plain_24);
 int hour = timeInfo->tm_hour;
 if (H24 == 1 && hour > 12){
   hour = hour - 12;
 }
 sprintf_P(buff, PSTR("%02d:%02d:%02d"), hour, timeInfo->tm_min, timeInfo->tm_sec);
 display->drawString(64 + x, 15 + y, String(buff));
 display->setTextAlignment(TEXT_ALIGN_LEFT);

}

void drawCurrentWeather(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y) {

 display->setFont(ArialMT_Plain_10);
 display->setTextAlignment(TEXT_ALIGN_CENTER);
 display->drawString(64 + x, 38 + y, currentWeather.description);
 display->setFont(ArialMT_Plain_24);
 display->setTextAlignment(TEXT_ALIGN_LEFT);
 String temp = String(currentWeather.temp, 1) + (IS_METRIC ? "°C" : "°F");
 display->drawString(60 + x, 5 + y, temp);
 display->setFont(Meteocons_Plain_36);
 display->setTextAlignment(TEXT_ALIGN_CENTER);
 display->drawString(32 + x, 0 + y, currentWeather.iconMeteoCon);

}


void drawForecast(OLEDDisplay *display, OLEDDisplayUiState* state, int16_t x, int16_t y) {

 drawForecastDetails(display, x, y, 0);
 drawForecastDetails(display, x + 44, y, 1);
 drawForecastDetails(display, x + 88, y, 2);

}

void drawForecastDetails(OLEDDisplay *display, int x, int y, int dayIndex) {

 time_t observationTimestamp = forecasts[dayIndex].observationTime;
 struct tm* timeInfo;
 timeInfo = localtime(&observationTimestamp);
 display->setTextAlignment(TEXT_ALIGN_CENTER);
 display->setFont(ArialMT_Plain_10);
 display->drawString(x + 20, y, WDAY_NAMES[timeInfo->tm_wday]);
 display->setFont(Meteocons_Plain_21);
 display->drawString(x + 20, y + 12, forecasts[dayIndex].iconMeteoCon);
 String temp = String(forecasts[dayIndex].temp, 0) + (IS_METRIC ? "°C" : "°F");
 display->setFont(ArialMT_Plain_10);
 display->drawString(x + 20, y + 34, temp);
 display->setTextAlignment(TEXT_ALIGN_LEFT);

}

void drawHeaderOverlay(OLEDDisplay *display, OLEDDisplayUiState* state) {

 now = time(nullptr);
 struct tm* timeInfo;
 timeInfo = localtime(&now);
 char buff[14];
 int hour = timeInfo->tm_hour;
 if (H24 == 1 && hour > 12){
   hour = hour - 12;
 }
 
 sprintf_P(buff, PSTR("%02d:%02d"), hour, timeInfo->tm_min);
 display->setColor(WHITE);
 display->setFont(ArialMT_Plain_10);
 display->setTextAlignment(TEXT_ALIGN_LEFT);
 display->drawString(0, 54, String(buff));
 display->setTextAlignment(TEXT_ALIGN_RIGHT);
 String temp = String(currentWeather.temp, 1) + (IS_METRIC ? "°C" : "°F");
 display->drawString(128, 54, temp);
 display->drawHorizontalLine(0, 52, 128);

}

void setReadyForWeatherUpdate() {

 Serial.println("Setting readyForUpdate to true");
 readyForWeatherUpdate = true;

}