Difference between revisions of "Veruca Gloop"

From LVL1
Jump to navigation Jump to search
Line 2: Line 2:
 
__NOTOC__
 
__NOTOC__
  
 +
== General ==
 
* '''Owner status:''' LVL1 owned
 
* '''Owner status:''' LVL1 owned
 
* '''Origination:''' Purchased through LVL1 general funds
 
* '''Origination:''' Purchased through LVL1 general funds

Revision as of 17:49, 30 November 2010

Back to list of Equipment

Lvl1 qr header.png
Veruca_Gloop&.png

General

LVL1 has three Ender 3 printers available for general use.

  • Owner/Loaner: LVL1
  • Serial Number: MISC
  • Make/Model: Standard/Pro
  • Arrival Date: 1/12/24
  • Usability: Yes
  • Contact: Matt, Kevin, Paul
  • Where: 3D Printing
Ender 3 Printers


Firmware

Matt has compiled a firmware for our Ender 3s:

One drive link to .bin files


General

  • Owner status: LVL1 owned
  • Origination: Purchased through LVL1 general funds
  • Make/Model: Makerbot Cupcake CNC 2230
  • Arrival Date: Raised from the boxes and to life October 16, 2010
  • Usability Status: Working

Specifications

  • Audrey 2 Mark 5 Extruder head
  • Usable Build Area: 100mm Width x 100mm Depth x 130mm Height
  • X/Y Positioning Resolution: 0.085mm
  • Z Positioning Resolution: 3.125 microns
  • Maximum X/Y Feed rate: 5000mm/minute
  • Maximum Z Feed rate: 200mm/minute
  • Typical Z-layer height: 0.3725mm
  • Outside measurements: 350mm x 240mm x 450mm

Printer settings

Unzip these settings and put them into here:

  • on mac put them here : /Applications/replicatorg-0021-mac/skein_engines/skeinforge-31/skeinforge_application/prefs
  • on Winders :
  • on linux :

From Tim

From twotimes[1]

Modifications

Working on it

  • Z axis wobble
  • Automated Build platform belt wobbles
    • I have no idea maybe a new belt made of thick kapton tape built to a tighter tolerance. covering it with pieces of narrow kapton seems to work for now.

Known Problems

Future Ideas