ShopBot

From LVL1
Jump to: navigation, search

Back to list of Equipment

Lvl1 qr header.png
ShopBot&.png

General

  • Owner/Loaner: LVL1
  • Serial Number: Serial Number
  • Make/Model: ShopBot PR Standard 48x96
  • Arrival Date: 12/3/2015
  • Usability: Yes
  • Contact: Daniel Johnsen
  • Where: Woodshop
DSC 7286.JPG


Note: Training & sign-off is required to use this machine. This is an advanced piece of equipment that can cause harm to itself, the surroundings, users and bystanders. Do not hack this machine.

Trainers Daniel Johnsen, Micah "Meesh" Burkhardt, Brian Wagner, Tim VanSant

Trained Individuals

Instructions and How To

How to cut aluminum sheets Cutting_Aluminum_Sheet_On_Shopbot


X and Y limit switches for the shopbot are

Baumer Inductive sensor IFRM 08N37A3/S35L . DataSheet: [1]

Y Limit Switch replaced 5/7/19 by B Wagner Sensor purchased on ebay for about $50