Difference between revisions of "RPi based 3D Scanner"

From LVL1
Jump to navigation Jump to search
Line 13: Line 13:
 
The scanning device is made from OpenBeam aluminum extrusion beams.  The joining of the beams is via custom 3D printed parts and plates.
 
The scanning device is made from OpenBeam aluminum extrusion beams.  The joining of the beams is via custom 3D printed parts and plates.
  
OpenBeam (violet)
+
=== OpenBeam (violet) ===
 
30 cm length qty. 3
 
30 cm length qty. 3
 +
 
18 cm length qty. 2
 
18 cm length qty. 2
 +
 
12 cm length qty. 2
 
12 cm length qty. 2
 +
 
8 cm length qty. 6
 
8 cm length qty. 6
  
3D Printed Joining Plates (red)
+
 
 +
=== 3D Printed Joining Plates (red) ===
 
Tee Joining Plate qty. 6
 
Tee Joining Plate qty. 6
 +
 
El Joining Plates qty. 4
 
El Joining Plates qty. 4
 +
 
Blank Plate 7.5x4.5 cm qty. 1
 
Blank Plate 7.5x4.5 cm qty. 1
 +
 
Feet qty. 6
 
Feet qty. 6
  
3D Printed Mounting Plates
+
 
 +
=== 3D Printed Mounting Plates ===
 
Stepper Motor Plate qty. 1 (aqua)
 
Stepper Motor Plate qty. 1 (aqua)
 +
 
PCB Plate 8x12cm qty. 1 (green)
 
PCB Plate 8x12cm qty. 1 (green)
 +
 
Power Converter Plate qty. 1 (green)
 
Power Converter Plate qty. 1 (green)
 +
 
RPi Case Plate qty. 1 (orange)
 
RPi Case Plate qty. 1 (orange)
 +
 
Camera Rear Plate qty. 1 (purple)
 
Camera Rear Plate qty. 1 (purple)
 +
 
Camera Front Plate qty. 1 (white)
 
Camera Front Plate qty. 1 (white)
 +
 
Laser Bracket Plate qty. 4 (blue and light blue)
 
Laser Bracket Plate qty. 4 (blue and light blue)
 +
 
Rotating Platform Saddle qty. 1 (yellow)
 
Rotating Platform Saddle qty. 1 (yellow)
 +
 
Platform Bearing Top Ring qty. 1 (yellow)
 
Platform Bearing Top Ring qty. 1 (yellow)
 +
  
 
[[File:RPI3D_Contruction_Side_View.jpg]]
 
[[File:RPI3D_Contruction_Side_View.jpg]]

Revision as of 12:18, 27 June 2019

The following scanner is based upon the FreeLss software and CiClops device design.

Website FREELSS

Website CiClop 3D Scanner

Basic Block Diagram

RPI3D Block Diagram.jpg

Structure

The scanning device is made from OpenBeam aluminum extrusion beams. The joining of the beams is via custom 3D printed parts and plates.

OpenBeam (violet)

30 cm length qty. 3

18 cm length qty. 2

12 cm length qty. 2

8 cm length qty. 6


3D Printed Joining Plates (red)

Tee Joining Plate qty. 6

El Joining Plates qty. 4

Blank Plate 7.5x4.5 cm qty. 1

Feet qty. 6


3D Printed Mounting Plates

Stepper Motor Plate qty. 1 (aqua)

PCB Plate 8x12cm qty. 1 (green)

Power Converter Plate qty. 1 (green)

RPi Case Plate qty. 1 (orange)

Camera Rear Plate qty. 1 (purple)

Camera Front Plate qty. 1 (white)

Laser Bracket Plate qty. 4 (blue and light blue)

Rotating Platform Saddle qty. 1 (yellow)

Platform Bearing Top Ring qty. 1 (yellow)


RPI3D Contruction Side View.jpg

RPI3D Contruction Rear View.jpg

RPI3D Contruction Platform View.jpg

Schematic

RPI3D General Schematic.jpg

Parts List