Oculus LVL1 2018
Jump to navigation
Jump to search
Contents
General
LVL1 has three Ender 3 printers available for general use.
|
Firmware
Matt has compiled a firmware for our Ender 3s:
Note
This camera is for our Flickr and Facebook photostreams. The equipment for virtual reality projects is Oculus Rifts.
Photostream
Photos taken with this camera are automagically uploaded to our Flickr stream and Facebook page. Please leave the camera turned on after taking photos so the upload can take place.
Batteries
The battery charger for this camera is on the wall next to the stairs that lead to the bathroom. The batteries are numbered. Please use them in order.
- If battery #1 is in the camera, battery #2 should be "on deck" (above the charger), and battery #3 should be in the charger.
- When you put battery #1 in the charger, move battery #3 "on deck" and put battery #2 in the camera.
- When you put battery #2 in the charger, move battery #1 "on deck" and put battery #3 in the camera.
- When you put battery #3 in the charger, move battery #2 "on deck" and put battery #1 in the camera.