Difference between revisions of "Oculus LVL1 2018"

From LVL1
Jump to navigation Jump to search
m
(Added photos of how to change batteries.)
(2 intermediate revisions by the same user not shown)
Line 15: Line 15:
  
 
== Photostream ==
 
== Photostream ==
Photos taken with this camera are automagically uploaded to our [http://www.flickr.com/photos/lvl1 Flickr stream] and [https://www.facebook.com/LVL1Hackerspace/ Facebook page]
+
Photos taken with this camera are automagically uploaded to our [http://www.flickr.com/photos/lvl1 Flickr stream] and [https://www.facebook.com/LVL1Hackerspace/ Facebook page]. Please leave the camera turned on after taking photos so the upload can take place.
 +
 
 +
== Battery Rotation ==
 +
The battery charger for this camera is on the wall next to the stairs that lead to the bathroom. The batteries are numbered. Please use them in order.
 +
* If battery #1 is in the camera, battery #2 should be "on deck" (above the charger), and battery #3 should be in the charger.
 +
** When you put battery #1 in the charger, move battery #3 "on deck" and put battery #2 in the camera.
 +
** When you put battery #2 in the charger, move battery #1 "on deck" and put battery #3 in the camera.
 +
** When you put battery #3 in the charger, move battery #2 "on deck" and put battery #1 in the camera.
 +
 
 +
== How to Change Batteries ==
 +
[[File:Oc lock.png|center|frame|Unlock the battery compartment on the bottom of the camera]]
 +
<br clear=all>
 +
[[File:Oc release.png|center|frame|Release the battery from the camera]]
 +
<br clear=all>
 +
[[File:Oc slide.png|center|frame|Slide the low battery out of the camera. Slide the charged battery into the camera. Note that the label faces front.]]
 +
<br clear=all>
 +
[[File:Oc charge.png|center|frame|Put the "On Deck" battery in the camera. Move the charged battery to the "On Deck" position. Put the low battery (that you just removed from the camera) in the charger.]]
 +
<br clear=all>
 +
* (Not pictured) Close and lock the battery compartment.

Revision as of 19:31, 20 March 2018

Back to list of Equipment

Lvl1 qr header.png
Oculus_LVL1_2018&.png

General

LVL1 has three Ender 3 printers available for general use.

  • Owner/Loaner: LVL1
  • Serial Number: MISC
  • Make/Model: Standard/Pro
  • Arrival Date: 1/12/24
  • Usability: Yes
  • Contact: Matt, Kevin, Paul
  • Where: 3D Printing
Ender 3 Printers


Firmware

Matt has compiled a firmware for our Ender 3s:

One drive link to .bin files


Note

This camera is for our Flickr and Facebook photostreams. The equipment for virtual reality projects is Oculus Rifts.

Photostream

Photos taken with this camera are automagically uploaded to our Flickr stream and Facebook page. Please leave the camera turned on after taking photos so the upload can take place.

Battery Rotation

The battery charger for this camera is on the wall next to the stairs that lead to the bathroom. The batteries are numbered. Please use them in order.

  • If battery #1 is in the camera, battery #2 should be "on deck" (above the charger), and battery #3 should be in the charger.
    • When you put battery #1 in the charger, move battery #3 "on deck" and put battery #2 in the camera.
    • When you put battery #2 in the charger, move battery #1 "on deck" and put battery #3 in the camera.
    • When you put battery #3 in the charger, move battery #2 "on deck" and put battery #1 in the camera.

How to Change Batteries

Unlock the battery compartment on the bottom of the camera


Release the battery from the camera


Slide the low battery out of the camera. Slide the charged battery into the camera. Note that the label faces front.


Put the "On Deck" battery in the camera. Move the charged battery to the "On Deck" position. Put the low battery (that you just removed from the camera) in the charger.


  • (Not pictured) Close and lock the battery compartment.