Difference between revisions of "Makership Kart Build"

From LVL1
Jump to: navigation, search
Line 6: Line 6:
 
= Day 0 =
 
= Day 0 =
 
Friday July 8  
 
Friday July 8  
Arrived at space with makership approved, plan to start fabrecating frame for kart
+
Arrived at space with makership approved, plan to start fabrecating frame for kart. Cut side frame rails: 4'2" long 1.5" diameter steel tubing. Found 2.5" tube for the back rail and a 1.575" tube for the front rail. Got sidetracked building battleship frame
 +
 
 +
 
 +
= Day 1 =
 +
Saturday July 9
 +
began welding frame using a tubeular [http://www.blocklayer.com/pipe-notchingeng.aspx template generator]

Revision as of 12:21, 9 July 2016

Plan

the goal of this project is to build a gas powered go-kart that can compete in the KYSCCA autocross events at the L-Ville convention center.


Day 0

Friday July 8 Arrived at space with makership approved, plan to start fabrecating frame for kart. Cut side frame rails: 4'2" long 1.5" diameter steel tubing. Found 2.5" tube for the back rail and a 1.575" tube for the front rail. Got sidetracked building battleship frame


Day 1

Saturday July 9 began welding frame using a tubeular template generator