Difference between revisions of "MIDI Projects"

From LVL1
Jump to navigation Jump to search
Line 40: Line 40:
 
** Diodes
 
** Diodes
 
** RGB LED
 
** RGB LED
 +
 +
 +
----
 +
 +
----
 +
* Elements of Drum Pads
 +
** 1/4" Neoprene Medium/Soft Sheet
 +
** Aluminum Sheet (flashing)
 +
** Piezo Element
 +
** 1" Soft Foam

Revision as of 16:36, 4 March 2019

JAC Midi Player Unit.jpg


  • Elements of MIDI Player:
    • Arduino NANO
    • Adafruit VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record - v4
    • Adafruit Stereo 3.7W Class D Audio Amplifier - MAX98306
    • Generic I2C to LCD
    • Generic LCD 20 Characters - 4 Lines
    • Generic Stereo Enclosed Speaker Set - 3W 4 Ohm
    • Generic Breadboard Power Supply (5V)
    • Two MIDI Ports
    • Simple (7805 and two capacitor) Voltage Regulator (5V)
    • 74LS14 Hex Inverter
    • 6N138 Opto-Isolator
    • Tactile Momentary Switches
    • 50K ohms Slider Potentiometer (logarithmic)
    • Stereo Headphone Jack (3.5 mm)
    • Resistors
    • Diodes
    • LEDs


JAC Midi Drum Machine.jpg


  • Elements of MIDI Drum Machine
    • Arduino Mega
    • Arduino Mega Shield (not pictured, used for wiring and connections)
    • Full Graphic Smart Controller (for RAMPS 1.4 board)
    • MIDI Port
    • 74LS14 Hex Inverter
    • Toggle Push Switch (SPST)
    • Spring Terminals (2 and 3 terminal varieties)
    • Resistors
    • Diodes
    • RGB LED




  • Elements of Drum Pads
    • 1/4" Neoprene Medium/Soft Sheet
    • Aluminum Sheet (flashing)
    • Piezo Element
    • 1" Soft Foam