Difference between revisions of "Full Spectrum Laser"

From LVL1
Jump to navigation Jump to search
Line 36: Line 36:
  
 
== Settings ==
 
== Settings ==
 +
 +
 +
== Links ==
 +
 +
Another duplicate page about out laser cutter.  This one came from Noisebridge.  http://wiki.lvl1.org/Laser_Cutter

Revision as of 20:34, 17 July 2011

Back to list of Equipment

Lvl1 qr header.png
Full_Spectrum_Laser&.png

General

LVL1 has three Ender 3 printers available for general use.

  • Owner/Loaner: LVL1
  • Serial Number: MISC
  • Make/Model: Standard/Pro
  • Arrival Date: 1/12/24
  • Usability: Yes
  • Contact: Matt, Kevin, Paul
  • Where: 3D Printing
Ender 3 Printers


Firmware

Matt has compiled a firmware for our Ender 3s:

One drive link to .bin files


How to use the freaking laser

1. turn the power strip that power the laser, water pump, and air pump \\ 2. make sure the water pump is on\\ 3. verify the water pump is on\\ 4. it will break the laser in 30 seconds if the water pump is not on\\ 5. make sure the air compressor is on\\ 6. turn on the emergency safety cut off switch\\ 7. turn the key to the on position\\ 8. rejoice in the light\\ 9. read this File:Laser Presentation.pdf\\

Do

  1. Check for water flow on startup
  2. Make sure exhaust fan is running
  3. Check for fires and put them out ;) 

Don't

 1.  Ever leave the laser unattended (see fires above)
 2.  Turn off the “Air” button. That needs to be on to protect the lens
 3.  Laser on Vinyl, PVC, Sintra (will produce corrosive and toxic gases)
 4.  Cut metals (it won't work)
 5.  Bump or touch the mirrors or lenses (will put the machine out of alignment or damage optics)

Settings

Links

Another duplicate page about out laser cutter. This one came from Noisebridge. http://wiki.lvl1.org/Laser_Cutter