RPi based 3D Scanner
The following scanner is based upon the FreeLss software and CiClops device design.
Website FREELSS
Website CiClop 3D Scanner
Contents
Basic Block Diagram
Structure
The scanning device is made from OpenBeam aluminum extrusion beams. The joining of the beams is via custom 3D printed parts and plates.
OpenBeam (violet)
30 cm length qty. 3
18 cm length qty. 2
12 cm length qty. 2
8 cm length qty. 6
3D Printed Joining Plates (red)
Tee Joining Plate qty. 6
El Joining Plates qty. 4
Blank Plate 7.5x4.5 cm qty. 1
Feet qty. 6
3D Printed Mounting Plates
Stepper Motor Plate qty. 1 (aqua)
PCB Plate 8x12cm qty. 1 (green)
Power Converter Plate qty. 1 (green)
RPi Case Plate qty. 1 (orange)
Camera Rear Plate qty. 1 (purple)
Camera Front Plate qty. 1 (white)
Laser Bracket Plate qty. 4 (blue and light blue)
Rotating Platform Saddle qty. 1 (yellow)
Platform Bearing Top Ring qty. 1 (yellow)