File:Zenbot Picture of hex wrench taped to CNC.jpg

Original file ‎(1,594 × 1,063 pixels, file size: 331 KB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:41, 9 November 2012		1,594 × 1,063 (331 KB)	Milutz (talk \| contribs)
	16:39, 9 November 2012	Error creating thumbnail: File with dimensions greater than 12.5 MP	4,830 × 3,220 (3.28 MB)	Milutz (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	IF
Exposure time	1,919,230,003/775,171,634 sec (2.4758774945059)
F Number	f/1.5566252462072E-5
ISO speed rating	1,250
Date and time of data generation	1:08 18:45:33
Lens focal length	5.375 mm
Orientation	Normal
Horizontal resolution	0.45976674482082 dpi
Vertical resolution	0.61184966412706 dpi
Software used	S 5D Mark II
Exposure Program	Normal program
Exif version	2.21
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	0.61661649479875
APEX aperture	1.0366809906923
APEX exposure bias	1.5291654527634
Maximum land aperture	1.0236846921491 APEX (f/1.43)
Metering mode	Center weighted average
Flash	Flash did not fire, compulsory flash suppression
DateTime subseconds	09
DateTimeOriginal subseconds	09
DateTimeDigitized subseconds	09
Supported Flashpix version	0,100
Color space	sRGB
Focal plane X resolution	4
Focal plane Y resolution	0
Focal plane resolution unit	inches
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Scene capture type	Standard
Lens used	Canon EF 17-40mm f/4L
Serial number of camera	220100147
Image width	190 px
Image height	190 px
Date and time of digitizing	18:45, 8 November 2012
File change date and time	18:45, 8 November 2012
IIM version	2